Voltage - Input Offset:	250µV
Base Part Number:	AD744
Supplier Device Package:	8-CERDIP
Package / Case:	8-CDIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	±4.5 V ~ 18 V
Current - Output / Channel:	25mA
Current - Supply:	3.5mA
Series:	--
Current - Input Bias:	30pA
-3db Bandwidth:	13MHz
Slew Rate:	75 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	J-FET
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The AD744BQ is one of the most popular operational amplifiers (op amps) in the world. This is due to its outstanding performance, wide range of applications and its ease of use. The opamp has an operating range of +3 V to +17 V and can be used for a variety of linear applications, such as instrumentation, level detections, and precision linar amplifiers. In addition, it is extremely small and efficient, making it especially popular for use in portable device applications.In this article, we will discuss the AD744BQ\'s application field and the working principle of the device. We will also discuss how the device can be used for linear amplification, instrumentation, and level detection applications.

Application Field of AD744BQ

The AD744BQ is a ultra-high-precision, unity gain stable, single-channel CMOS amplifier. It is designed specifically for use in medical and industrial equipment. The device is often used in ECG, EEG, and other medical instruments, as well as in industrial control systems. It is a high performance precision opamp, offering ultra-low offset voltage and high common-mode rejection ratio.The AD744BQ is also used in linear amplification applications, such as active filters and audio amplifiers. Its low input bias current and low noise figure make it ideal for this type of application. In addition, its high slew rate (139 V/μs) and low latency (0.85 μs) makes it suitable for use in instrumentation, such as data acquisition and control systems.

Working Principle of AD744BQ

The AD744BQ is a CMOS-based voltage-output amplifiers. It needs a supply voltage in the range of +3 V to +17 V to operate. At its core is an operational amplifier, which is an amplifier with only two input ports-the inverting and non-inverting inputs. The inverting input receives a signal from a negative input voltage source. The non-inverting input receives a signal from a positive input voltage source. These two signals are then amplified by the amplifier, and the resulting output voltage is a linear function of the difference between the two inputs.The AD744BQ also makes use of feedback, which is a process where a portion of the output signal is fed back to the inverting input to form a closed loop. This closed loop ensures that the gain of the device is kept constant over a range of frequencies.

Conclusion

The AD744BQ is a high-performance, ultra-precision CMOS amplifier. It is designed for use in a variety of linear amplification, instrumentation, and level detection applications. Its low input bias current and low noise figure make it ideal for linear applications, while its high slew rate and low latency make it suitable for instrumentation. The device is highly efficient and uses very low power, making it ideal for use in portable device applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description