AD7940BRM-REEL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC) have gained increasing attention over the last few decades. Among them are AD7940BRM-REEL7, a widely used part for providing analog-to-digital conversion. This section will discuss the application field of the AD7940BRM-REEL7, as well as the working principle of the device.

Application Field

The AD7940BRM-REEL7 is a single-channel, low-power, voltage input, four-bit successive approximation type Analog-to-Digital Converter (ADC) with low-power complementary metal oxide semiconductor (CMOS) technology. It is one of the power-saving solutions and provides many features.

• It has high accuracy with a resolution of 4-bits up to ±15 LSB and low power consumption of only 3.5mA.
• It features very low input voltage range from ±2.5V to 0V.
• It also has 0.1% nonlinearity down to 0V and a plus or minus 25 uV noise floor.
• It has an operating temperature range of -40°C to 85°C, making it suitable for use in various applications.

The AD7940BRM-REEL7 is typically used in medical device, industrial, and consumer applications, such as patient monitoring systems, ultrasonic imaging systems, and battery-powered measuring instruments, where high accuracy and low power are required. This device also can be used in data acquisition systems, monitoring systems in field measurement applications and smart sensor designs.

Working Principle

The AD7940BRM-REEL7 is divided into two parts: the analog part and the digital part. The analog part is responsible for the analog-to-digital conversion, while the digital part is responsible for the conversion from the analog data to digital data.

The device works by firstly converting the analog input signal into digital data using the analog part. It does this by using two comparators and two registers. The two comparators compare the input signal with two different reference voltages. If the voltage from the input is lower than the reference voltage, the device turns off the digital logic and the bit is set to \'0\'. If the voltage is higher than the reference voltage, the logic is turned on and the bit is set to \'1\'. The two registers store the comparative data, allowing the analog data to be converted into binary data.

The digital part is responsible for decoding the last two bits of the data and convert it into a number. The ADC then outputs the digital data in a serial data format. The number is then read by the external microcontroller or computer.

In order to operate the AD7940BRM-REEL7 successfully, the device must be configured properly. This can be done by setting up the reference voltage and the conversion clock. Once the device is set up correctly, the ADC is ready to accept and convert the analog signal into digital data quickly and accurately.

In summary, the AD7940BRM-REEL7 is a powerful and efficient Analog-to-Digital Converter that can be used for a wide range of applications. Its high accuracy and low power consumption make it a popular choice for many applications. It has a wide operating temperature range and small form factor, making it ideal for portable and embedded systems.

The specific data is subject to PDF, and the above content is for reference