AD9246BCPZRL7-105

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AD9246BCPZRL7-105 is a 10-bit, 1.25GSPS, monolithic CMOS analog-to-digital converter (ADC) optimized for use in test and measurement applications. It features a high dynamic range, low power consumption, and a wide bandwidth bandwidth up to 400 MHz. This makes it an ideal solution for applications such as laboratory measurements, radar systems, communications systems, and instrumentation.

The AD9246BCPZRL7-105 is designed to perform accurate conversion of low-frequency analog signals into digital information. It can handle very wide input signals and has a differential full-scale input range of ±2 V to ±3 V and an input impedance of 50 Ω. This ADC is capable of achieving very low conversion time, with a maximum conversion rate of 1.25 GSPS.

The AD9246BCPZRL7-105 has two analog input pins, differential digital output and an on-chip reference voltage generator. The ADC contains two voltage references, one for full-scale adjustment and the other for zero-scale adjustment. The ADC has a differential non-linearity of less than ±1 LSB, a noise free code of 10-bit two’s complement, and a low distortion dynamic performance.

The AD9246BCPZRL7-105 is suitable for use in high performance applications such as astronomy, cellular base station receivers, aerospace, RADAR, navigation, medical imaging, instrumentation, high frequency imaging, Wideband Multi-mode Receiver (WMMR), software defined radio (SDR) and more. In particular, the ADC is optimized for applications that require very high performance, such as high resolution imaging, validating first order constraints, and non-destructive testing.

The AD9246BCPZRL7-105 is designed to work on a low supply voltage of 3.3V to 3.6V and has a very low power consumption of 830 mW at 1.25GSPS, making it useful in battery-operated applications. The ADC also has programmable test patterns to facilitate system troubleshooting and test simulation.

The working principle of the AD9246BCPZRL7-105 is simple. It takes in a continuous analog signal and applies an analog-to-digital conversion process to create a digital representation of the same signal. This digital representation is then output as a 10-bit two’s complement value. The ADC uses a combination of segmented progressive sampling, a digital-correction loop and a high-speed comparator to achieve accurate conversion results.

The AD9246BCPZRL7-105 is a high-performance ADC that is suitable for a wide range of applications, from high resolution imaging to low power sensor systems. Its 10-bit resolution and its 1.25GSPS conversion rate make it an ideal choice for applications that require high-speed data acquisition with low levels of distortion. Additionally, its low power consumption, wide input signal range and differential digital output make it an attractive option for battery-powered applications.

The specific data is subject to PDF, and the above content is for reference