AD9629BCPZ-20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data acquisition is an integral part of many industrial processes, allowing the direct measurement and characterisation of signals into meaningful data. A common component of data acquisition systems is an Analog to Digital Converter (ADC). One such ADC is the AD9629BCPZ-20, an 18-bit, 2-channel, 2.5 MSPS SAR ADC.

The AD9629BCPZ-20 is a monolithic CMOS ADC that has been designed to offer high performance with low power consumption. It offers a sample rate of 2.5 MSPS and has an integrated reference voltage. The ADC offers a very low differential non-linearity of 0.0015%, integral non-linearity of 0.003%, and SNR of 109.3 dBFS.

The AD9629BCPZ-20 excels in its ability to maintain excellent signal integrity with low noise, while operating with a supply voltage range of 2.7 V to 3.6 V. It is the ADC of choice for many industrial applications due to its capabilities and wide supply voltage range.

The AD9629BCPZ-20 provides an external offset adjust pin to simplify the calibration of the device and reduce the amount of power consumed during operation. It also provides an internal clock, coupled with a selectable clock divider, which allows for different sample rates.

The AD9629BCPZ-20 has a wide range of applications. It is suitable for use in medical imaging, instrumentation, data acquisition, control systems and communications. It is also suitable for a wide range of applications such as automotive, consumer, industrial, and aerospace.

The ADC\'s working principle is based on the successive approximation register (SAR) architecture. This architecture consists of a counter that is used to convert an analong input to a digital output. The counter counts up until it reaches a certain reference value given by the voltage at the input section of the ADC. At this point, the value is marked as a digital value.

The AD9629BCPZ-20 has a dedicated voltage reference module and a comparator. The comparator is used to compare the input signal against the reference. The output of the comparator is then used to drive the SAR counter. The value of the SAR counter is then used to generate the output value.

The AD9629BCPZ-20 also has two channels, allowing two input signals to be measured simultaneously. Each of the channels has an input buffer which can be used to prevent external noise interfering with the signal. The channels also have adjustable gain and offset settings, allowing for easy and precise signal measurement.

The AD9629BCPZ-20 ADC is a versatile and robust solution for converting analog signals to digital. Its low power consumption, wide supply voltage range and excellent signal integrity make it the ideal choice for many industrial applications.

The specific data is subject to PDF, and the above content is for reference