AD9958BCPZ-REEL7 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Direct Digital Synthesis (DDS) technology has been around for decades, and its usage in different areas has been growing steadily. The AD9958BCPZ-REEL7 is a frequency synthesizer chip for use in phase locked loops (PLLs) and other applications that require a DDS-based solution. It is a high performance programmable device that provides an output frequency within the range of 70MHz to 150MHz. The device is suitable for a wide range of applications, including radio, audio, medical ultrasound, and industrial test and measurement.

The AD9958BCPZ-REEL7 is a 5th-order hybrid NCO (numerically controlled oscillator) that combines the advantages of both numerically controlled oscillators and voltage controlled oscillators. The main advantages of this type of the NCO are low noise, high modulation bandwidth, fast switching times and lower power consumption. The NCO contains four 14-bit registers, including a Frequency Word Register which stores the frequency of the output signal and an Amplitude Word Register for amplitude control. The NCO also includes a Gain Register for controlling the gain of the output signal and an Offset Register for offsetting the output signal.

The AD9958BCPZ-REEL7 is a fully digital device that supports both linear and non-linear frequency modulation. The modulation rate is programmable and can be adjusted from 0 to a maximum of 24MHz. The device can operate in either a single-tone or a dual-tone mode and supports frequency hopping, frequency shift keying, and amplitude shift keying. The device also provides various power saving modes, including sleep mode, standby mode and deep sleep mode.

The AD9958BCPZ-REEL7 operates as a dual-density phase accumulator that uses two 16-bit accumulators, one for frequency and one for phase. The frequency accumulator is loaded with the input frequency, and the phase accumulator is updated with the frequency information to generate the output signal. The phase accumulator and the frequency accumulator are both clocked by the internal master oscillator, which is running at a fixed frequency of 250MHz. The phase accumulator generates a linear interpolated phase ramp at the output frequency and is used to translate the frequency word register value into a phase word.

The AD9958BCPZ-REEL7 is a highly programmable device that can be used in a variety of applications including frequency synthesis, frequency hopping, multicarrier modulation, digital signal processing, and digital receivers. The device provides high performance, low-noise and low-cost solutions for a wide range of applications. The device can be used in PLLs, voltage/current tracking systems, and signal processing applications.

In summary, the AD9958BCPZ-REEL7 is a high-performance integrated frequency synthesizer chip, designed for use in phase-locked loops and other applications that require a DDS-based solution. The device is suitable for a wide range of applications, including radio, audio, medical ultrasound, and industrial test and measurement. The device provides high performance, low noise, and low cost solutions for a variety of applications. The device provides a range of features, including programmable modulation rates, dual-tone operation, frequency hopping and amplitude shift keying, and power saving modes. The device is easy to configure and program, and can be used in a variety of applications with ease.

The specific data is subject to PDF, and the above content is for reference