ADA4062-2BRZ

Voltage - Input Offset:	500µV
Base Part Number:	ADA4062
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	8 V ~ 36 V, ±4 V ~ 18 V
Current - Output / Channel:	20mA
Current - Supply:	165µA
Series:	--
Current - Input Bias:	2pA
Gain Bandwidth Product:	1.4MHz
Slew Rate:	3.3 V/µs
Output Type:	--
Number of Circuits:	2
Amplifier Type:	J-FET
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ADA4062-2BRZ Application Field and Working PrincipleThe ADA4062-2BRZ is an Operational Amplifier (Op Amp) designed to provide excellent performance while offering wide usage range and ease of use, making it a great all-in-one Op Amp solution. It is a dual-channel amplifier with a low operating current, low output offset voltage, high gain, and low input and output power dissipation. It is also capable of driving high-capacitive loads, providing up to 5.5V peak-to-peak sag.The Op Amp can be used in many applications, from instrumentation and signal conditioning to power amplifiers, active filters, and power supplies. It is especially suited for applications where low noise and high sensitivity are desired. The ADA4062-2BRZ features a low input offset voltage of 1.0mV, making it especially suitable for precision applications such as temperature and pressure measurements, flow control and instrumentation, and industrial process control. The device also offers very low distortion (below 0.1%), making it ideal for high-definition audio and video applications.The ADA4062-2BRZ is designed to operate with common single-supply and dual-supply voltages such as 5V, ±5V, and ±12V. It can also be powered from a single-supply voltage up to 36V, making it ideal for powering precision and high-speed analog circuits from a wide range of power sources.The working principle of the ADA4062-2BRZ operational amplifier is based on the basic operational amplifier design, which uses three components: an input stage, an output stage, and the feedback loop.The input stage consists of two transistors with emitter followers. A differential input is applied to the two emitters, which is then passed to the output stage. The output stage consists of two complementary MOSFET transistors, which drive the output of the device.The signal is then passed through the feedback loop, which consists of resistors and capacitors. The components in this loop provide the gain and frequency response characteristic of the amplifier. The signal coming out of the feedback loop is then passed back to the input stage, where the signal is amplified and sent to the output.The ADA4062-2BRZ has a gain of 10,000, with a maximum output of 10V, and a minimum output of -10V. The slew rate of the device is 4V/µs, which makes it suitable for high-speed applications.Overall, the ADA4062-2BRZ is an excellent all-in-one Op Amp solution for many applications, offering great performance and easy use. It is capable of driving high-capacitive loads, providing low distortion, low noise, and high sensitivity. In addition, it is powered from a single or dual-supply voltage and can operate up to 36V, making it ideal for powering precision and high-speed analog circuits from a wide range of power sources.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description