ADAS1000-2BCPZ-RL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog Front End (AFE) devices are used in data acquisition systems to convert analog signals into digital data for processing. The ADAS1000-2BCPZ-RL is a precision AFE designed for the acquisition of high accuracy and wide dynamic range analog signals in a variety of applications. This device provides the flexibility of a wide input range while providing amplification, filtering, and analog-to-digital conversion (ADC) in a single device.

The ADAS1000-2BCPZ-RL is an AFE device intended for use in precision biomedical instrumentation applications, such as machine vision and medical imaging, electrocardiogram (ECG) monitoring, and ultrasound systems. It is based on a proprietary two-stage architecture that combines high-precision amplifiers, a low-noise 24-bit Sigma-Delta ADC, and a 60Hz notch filter to provide dynamic range and precision performance over a wide range of signal levels. The device is available in a compact, rugged, and low-power 24-pin DIP or 28-pin SSOP package.

The working principles of the ADAS1000-2BCPZ-RL can be broken down into four main stages; (1) amplification, (2) filtering, (3) analog-to-digital conversion, and (4) digital signal processing. The amplification stage consists of two stages of programmable gain amplifiers (PGAs) capable of providing up to 64dB of gain adjustment in 1dB increments, with very low noise voltage and current noise figures. These PGAs are also very stable and can operate over a wide range of temperatures, providing excellent thermal performance.

The filtering stage consists of two differential low-pass filters with a cutoff frequency of approximately 1kHz, which keep undesirable high-frequency noise away from the ADC. The analog-to-digital conversion stage uses a 24-bit Sigma-Delta ADC which is capable of high-resolution, low-frequency analog-to-digital conversion. The ADC is also equipped with a 60Hz notch filter to reduce any power line interference in the analog input.

Finally, the digital signal processing stage uses a high-performance 64-bit floating-point processor to process the digital output from the ADC. The processor is also used for calibration and for configuring the filters and gains of the device. The digital output from the processor is then output to the user via a serial communication interface.

In summary, the ADAS1000-2BCPZ-RL is a precision analog front end device designed for high-accuracy and wide-dynamic range applications in the biomedical instrumentation field. It provides a combination of low-noise amplification, filtering, and high-resolution analog-to-digital conversion in a single device, and is suitable for a wide range of applications such as ECG monitoring, ultrasound systems, and machine vision.

The specific data is subject to PDF, and the above content is for reference