ADF4107BCPZ-REEL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADF4107BCPZ-REEL is a high speed fractional-N frequency synthesizer, which works on the principle of a phase-locked loop (PLL) to generate precise frequencies in communication and broadcast systems. The device provides a low jitter clock signal with a high output frequency range of up to 1.1 GHz. The chips can be configured to run off a variety of different reference signals, and can be used to replace traditional voltage-controlled oscillators (VCOs) in a range of applications.

Applications of the ADF4107BCPZ-REEL include wireless communications, such as Wi-Fi, Bluetooth, and LTE, as well as radio frequency (RF) systems, broadcast systems, and digital television. The chip can also be used in a range of industrial and medical applications, such as robotics, laboratory equipment, and patient monitoring systems. The device has two enable inputs that allow for dual-mode operation, and a Fine Tune adjustment pin that allows for fine tuning of the output frequencies.

The ADF4107BCPZ-REEL has an input voltage range of 2.7V to 4.5V and is able to automatically select between a differential input signal or single-ended input signal depending on the application. The device also has a CMOS-compatible serial data input, which can be used to update the internal frequency registers. Additionally, the chip contains a high-impedance current output, which can be used to drive a wide range of loads, such as quartz crystals and surface-acoustic-wave (SAW) filters.

The working principle of the ADF4107BCPZ-REEL involves a phase-locked loop. This system utilizes two oscillators, the reference oscillator and the voltage-controlled oscillator (VCO). The reference oscillator is the input signal and has a static frequency, while the VCO signal is the output signal and has a varying frequency. The frequency of the VCO signal is adjusted using a feedback loop and is “locked” to the reference signal. The VCO signal is then used as the main signal for the device.

The ADF4107BCPZ-REEL then uses two frequency dividers, a phase/frequency detector, and a loop filter to generate the desired output signal. The reference signal is first divided by the reference frequency divider, which provides the reference signal to the phase/frequency detector. The output of the VCO is then divided by the VCO frequency divider and compared to the reference signal in the phase/frequency detector. The phase/frequency detector then compares the two signals and adjusts the VCO signal until it is in lock with the reference signal.

The output of the phase/frequency detector is then filtered by the loop filter and sent to the VCO. The loop filter removes any high frequency noise and adjusts the loop parameters to ensure the best possible performance. The VCO then uses the output of the loop filter to control its frequency, which is output as the ADF4107BCPZ-REEL\'s signal.

The ADF4107BCPZ-REEL is a high performance frequency synthesizer that is suitable for a wide range of applications. The device offers a high output frequency range, a low jitter clock signal, and dual-mode operation. Additionally, the chip is designed to be used with both single-ended and differential input signals, and features an adjustable fine tune control for precise frequency generation. The device is ideal for use in wireless communications, RF systems, broadcast systems, and digital television.

The specific data is subject to PDF, and the above content is for reference