ADG211AKRZ-REEL

Switch Time (Ton, Toff) (Max):	600ns, 450ns
Base Part Number:	ADG211
Supplier Device Package:	16-SO
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	-80dB @ 100kHz
Current - Leakage (IS(off)) (Max):	5nA
Channel Capacitance (CS(off), CD(off)):	5pF, 5pF
Charge Injection:	20pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	±15V
Voltage - Supply, Single (V+):	15V
Channel-to-Channel Matching (ΔRon):	5.75 Ohm
On-State Resistance (Max):	115 Ohm
Number of Circuits:	4
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NC
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ADG211AKRZ-REEL Application Field and Working Principle

Introduction

The ADG211AKRZ-REEL is a highly specialized interface device featuring an analog switch which is used for multiplexing, demultiplexing, and switching applications. It has 4 channels and is typically used for high speed data manipulation. It is an integral part of data acquisition, sample and hold circuits, and motor control systems. In this article, we will discuss the typical applications of the ADG211AKRZ-REEL as well as its working principle.

Application field

The ADG211AKRZ-REEL is used in a variety of applications related to data Acquisition and control, such as:

• Data acquisition: The ADG211AKRZ-REEL is used for multiplexing and demultiplexing data for use in data acquisition systems. It can be used to switch and route analog or digital signals, and can be configured to sample multiple input channels simultaneously. It is ideal for applications that require high speed data manipulation.
• Sample and hold circuits: The ADG211AKRZ-REEL can be used in sample and hold circuits, where it is used to select and store an input voltage. Through its multiplexing capabilities, the ADG211AKRZ-REEL can select several input channels and store them in a single output.
• Motor control: The ADG211AKRZ-REEL can be used in motor control systems to multiplex signals for speed control and current sensing. It can be used to switch large currents and voltages and is ideal for motor control applications requiring high speed response.

Working Principle

The ADG211AKRZ-REEL is based on a multiplexer architecture, where it uses an analog switch to connect and disconnect paths. The multiplexer has 4 channels and each channel can be connected to either one of two possible input pins. The multiplexer is enabled by applying a logic signal to its control pin. When the logic signal is high, the multiplexed signal is applied to the output pin. When the logic signal is low, the multiplexed signal is disconnected from the output pin.The ADG211AKRZ-REEL can be used to switch between its two input channels, allowing the selection of either input signal. It can also be used to multiplex several input channels and route the selected signal to one or more output channels. The multiplexer can also be used to control and route digital signals, as well as sample multiple input channels simultaneously.

Conclusion

The ADG211AKRZ-REEL is an analog switch which is ideal for data acquisition, sample and hold circuits, and motor control systems. It uses a multiplexing architecture which allows for the selection of either the two input channels or multiple input channels simultaneously. With its high speed data manipulation capabilities, it is well-suited for use in applications that require multiple data stream manipulation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description