ADG413BRUZ-REEL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADG413BRUZ-REEL is an analog switch, multiplexer and demultiplexer. The device is a low-power, low-on state resistance, single-pole/double-throw (SPDT) analog switch with an optional enable. It is designed to operate over a wide range of input voltages, from 0V to 3.3V, with output voltage and current limitations. The ADG413BRUZ-REEL provides low on-state resistance and switching capabilities from 1V to 10V with no separation of the inputs or outputs.

The switch incorporates a breakdown voltage of about 200mV for up to 2.5V input and 10V for above 2.5V input, allowing for a wide range of application fields. The device is capable of switching arbitrarily low currents and higher-than-standard operating temperatures, and offers high bandwidth, excellent signal integrity and low power consumption.

The ADG413BRUZ-REEL\'s working principle is simple. It consists of two input ports and one output port, which is activated when the signal on one of the inputs is greater than the signal on the other. The signal on the high-side input is connected to the output; the signal on the other input is tied to ground.

When the optical link is energized, the switch is closed; when the optical link is off, the switch is open. The switching is done by applying control voltages to the analog switch control, which opens and closes the gate, providing a low electrical current flow between the two inputs. The maximum switching speed is 25MHz, and the input port can tolerate inputs up to 10V.

The ADG413BRUZ-REEL is a versatile device whose applications span from optocouplers, low power analog switches, multiplexers and demultiplexers. It is often used in mixed signal designs in industrial, military and aerospace applications, such as active antenna systems, microwave radar, portable radios, satellite communication systems and high-end instrumentation.

In addition, the device can be used for level shifting, as an interface between logic and analog, in communications systems and in radio-frequency and broadcast systems, managing analog signals in power monitors, voltage controllers and surge and waveform switch applications. Similarly, the device is well suited for implementing remote control elements and auto resolution switching.

The ADG413BRUZ-REEL provides an economized switch solution by combining a wide range of features and an integrated internal pull-up, enhancing efficiency and input range. The low-on resistance, low voltage and current handling, along with its low switching power make it a good choice for any application that requires an economical, tiny package, rapid response and reliable performance.

The specific data is subject to PDF, and the above content is for reference