ADS7805UBE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADS7805UBE4 provides a 5-bit, single-chip analog-to-digital converter that can be used in a variety of applications. With an input range of 0V to 5V and a maximum sampling rate of 8MHz, it is well suited for sampling data from analog components, such as sensors and analog-to-digital converters. The ADS7805UBE4 is especially useful for sampling high-speed signals, such as from audio devices.

The ADS7805UBE4 uses a SAR (Successive Approximation Register) architecture to convert the analog input signal into a digital signal. When a signal is applied to the converter, the on-chip ADC (Analog-to-Digital Converter) performs a series of comparative operations to determine the most accurate representation of the input signal. During these operations, the signal is digitized with an accuracy of 5 bits, with a resolution of 0.5V. The conversion is done in a single cycle and therefore the sampled signal can be considered to be an average value over the period of one cycle.

The output of the ADS7805UBE4 is either a 5-bit binary coded output or an 8-bit pulse-width modulated signal. The output can be used for direct control of devices such as a motor, a heater, or a light source. The ADC can be programmed for either a wide dynamic range (histogram) mode or a narrow dynamic range (sliced) mode. In the wide dynamic range mode, the full-scale input range spans the 5-bit upper and lower bounds. In the narrow dynamic range mode, the 5-bit slice is centered around 0V. This allows the user to select a range of interest, and discard any signals outside of the selected range.

The ADS7805UBE4 is powered by a single 3.3V supply, and has a low power consumption of approximately 5mA. The chip includes an on-chip temperature compensated reference to make sure that the output data is accurate over a wide range of temperature conditions. The output can be connected to an 8-bit microcontroller directly, or it can be used in combination with an external 8-bit microcontroller to achieve higher sample rates.

The ADS7805UBE4 is useful for a wide range of applications, including data acquisition and signal conditioning. It can be used to sample audio signals for digital signal processing, for data logging, and for sensor acquisition. It is especially useful for sampling the output of analog-to-digital converters, as it can easily convert high-speed signals with a high degree of accuracy. In addition, the low power consumption and wide dynamic range make the ADS7805UBE4 a versatile and cost-effective solution for a variety of applications.

The specific data is subject to PDF, and the above content is for reference