ADS7822E/250G4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADCs) are essential for any embedded system that requires some degree of data acquisition. The ADS7822E/250G4 is one such device, used in a variety of applications. It is an integrated circuit (IC) that is used to convert a continuous input voltage into a corresponding digital message. This article provides an overview of the ADS7822E/250G4, including its application field, working principle and some key features.

The ADS7822E/250G4 is a low-powered, 4-channel, 10-bit, precision Analog-to-Digital Converter (ADC). It is designed for applications that require long-term operation from a single battery source, such as medical and portable instrumentation systems. It is also suitable for industrial and automotive applications, due to its wide input voltage range (up to 16V).

The device is suitable for use in systems where low-power consumption is essential. This makes it particularly suitable for power-sensitive applications such as portable instrumentation, energy harvesting, data logging, and medical applications. It has a wide temperature range, from -40°C to 85°C, so it is suitable for operation in challenging environments.

Analog to digital converters convert analog signals into digital signals. The ADS7822E/250G4 is a successive approximation register (SAR) based ADC. It uses a successive approximation technique to convert the incoming analog voltage into a corresponding digital value, expressed in 10-bit words. The SAR device contains an internal reference voltage that provides the working voltage range for the conversion. The ADC then compares the input voltage to this reference voltage, and outputs the corresponding digital value.

The sample and hold circuit of the device stores the input voltage and then transmits the voltage to the SAR. The sample and hold circuit samples the input every 630 ns, which allows for higher resolution than other types of ADC. After the conversion is complete, the ADC outputs a 10-bit word in the form of a serial data stream.

The ADS7822E/250G4 is a single-chip, 4-channel, 10-bit ADC that is based on a successive approximation register architecture. It features a low-power consumption of 2.6 mA, a wide input voltage range (up to 16V), and a wide temperature range (from -40°C to 85°C). The device is also available in a 8-bit version, with a 1.5mA power consumption.

The device incorporates a serial interface, allowing for easy connection to a microcontroller or any other peripheral. It also has a built-in calibration feature, which is used to compensate for environmental fluctuations in temperature, voltage, and other factors that might affect the performance of the converter. Additionally, the device has an interrupt output, which signals the microcontroller when a conversion is complete.

The ADS7822E/250G4 also includes an on-chip logic for over-voltage detection and protection. This logic monitors the input voltage and automatically limits it to the upper limit of the converter if it exceeds the pre-defined maximum level. This helps to protect the device from damage due to accidental overvoltage.

In summary, the ADS7822E/250G4 is a 4-channel, 10-bit, precision analog-to-digital converter with a low power consumption, wide input voltage range, wide temperature range and on-chip logic for over-voltage protection. It is suitable for use in power-sensitive applications such as portable instrumentation, energy harvesting, data logging, and medical applications.

The specific data is subject to PDF, and the above content is for reference