AEDT-8101-A14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders are devices that convert mechanical motion into an electrical signal. In its simplest form, an encoder is a motor that converts a single rotational motion into a dual or multiple signal encoder output pulse. An AEDT-8101-A14 encoder makes use of the single rotational motion of a vaned wheel to detect incremental position in a servo motor. The main application of AEDT-8101-A14 is in motion control where it detects incremental position in a motor that is used for automation.

The AEDT-8101-A14 encoder is a single-turn rotary encoder which uses an optical disk with radial lines and a sensor to detect rotation and output a rectangular signal waveform. The encoder has a built-in elasticity for lower-torque transmission and runs at high speeds to detect up to 2000 revolutions per minute, resulting in a high resolution of 5μm, making it perfect for servo motor applications.

The working principle of the AEDT-8101-A14 encoder is as follows: a vaned wheel with a radial pattern of alternating black and white lines is mounted to the motor shaft. As the vaned wheel rotates, it passes under the encoder\'s light source which generates a beam of light across the radial pattern of the wheel. The light is then detected by a sensor, which produces an electrical pulse. The sensor outputs two waveforms - a pulse waveform which is proportional to the speed of rotation and a rectangular waveform which is proportional to the incremental position.

The output from the sensor is then sent to the encoder\'s electronic circuit which processes the signal and converts it into a digital value. This digital value is then transmitted to the motion control system which uses it to control the motor. The AEDT-8101-A14 can also be used to measure velocity and to provide feedback to the control system.

In summary, the AEDT-8101-A14 is an encoder that makes use of the single rotational motion of a vaned wheel to detect incremental position in a servo motor. It has a high resolution of 5μm, a maximum rotation speed of 2000 RPM and is able to provide feedback to the motion control system. The AEDT-8101-A14 is a reliable, cost-effective encoder solution for motion control applications.

The specific data is subject to PDF, and the above content is for reference