AFS20A26-915.00-T2 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface acoustic wave (SAW) filters, like the AFS20A26-915.00-T2, are the basis of today\'s communication systems. The AFS20A26-915.00-T2 is an advanced SAW filter that is ideal for many applications. This filter is designed to reduce interference and increase the quality of voice and data transmissions. It is an excellent choice for radio, military communications, satellite TV, microwave communications, cellular communications, and many other applications.

A SAW filter consists of two parts: the crystal and the RF signal amplifier. The crystal is made from quartz or some other suitable material and is etched in a pattern on a wafer. This pattern contains two interleaved sets of fingers, which are arranged in a meandering pattern. The signal passes through two metal wires, which act as electrodes, and is converted to vibrations which are then converted to a reaching signal.

The RF signal amplifier amplifies the signal and output is then sent to the desired destination. The output of the filter depends on the parameters of the filter, such as center frequency, bandwidth, group delay, and insertion loss. These parameters will define the performance of a filter and determine which applications it can be used for.

The AFS20A26-915.00-T2 is designed for applications requiring a wide range of frequencies, mainly for mobile devices. It operates between 0.2 and 10 Ghz and has a center frequency of 915 Mhz. Its insertion loss is 1.0 dB and its group delay is 1.0 ns. This filter is suitable for many applications, such as satellite TV, cell phones, GPS, microwave communications, automotive, general aviation, military communications, and so on.

The AFS20A26-915.00-T2 is ideal for its low insertion loss and wide frequency range. The insertion loss is only 1dB, which is less than most other similar filters. The group delay is only 1.0ns, which makes it very stable. The high frequency range makes it suitable for many applications as it can operate at much higher frequencies than many other filters.

The AFS20A26-915.00-T2 is also very reliable and stable. The crystal wafers are designed to eliminate interference and are tested to ensure that they meet the highest standards. The filter is also coated to prevent any environmental damage. This makes it a very dependable filter for many applications.

The AFS20A26-915.00-T2 is an excellent choice for many applications. It has a wide frequency range, low insertion loss, and controlled group delay. It is highly reliable and is designed to minimize interference. With its large pool of features, it is an ideal filter for a variety of applications.

The specific data is subject to PDF, and the above content is for reference