AFS20A53-1575.42-T3 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface Acoustic Wave (SAW) filters are used in almost all of modern wireless communication systems. These filters are based on a range of physical phenomena associated with sound propagation, including the well known Doppler effect, which is the basis of most modern radar systems. The AFS20A53-1575.42-T3 filter is a SAW-based filter designed for use in the 2.4GHz ISM band.

The filter works by creating a linear, delayed frequency response, where the frequency of the desired signal is delayed relative to the other frequencies present. This is done by using an array of reflectors, or corrugations, which are placed in an attenuator. The attenuator has the ability to change the frequency of the signal that it passes. This is accomplished by adjusting the size and spacing of thereflectors. The size and spacing of the reflectors can be adjusted to ensure that the desired signal frequency is delayed while the other frequencies are blocked or attenuated. This ensures that only the desired signal is received and that unwanted frequencies are blocked.

The AFS20A53-1575.42-T3 filter is designed to be used in the industrial, scientific and medical (ISM) band. This band is used for a variety of applications, including wireless networking, radio navigation and broadcast systems, as well as wireless communications. The filter is designed to be used in antenna systems operating in the band, such as dipole antennas, patch antennas and Yagi antennas. In these antenna systems, the filter works to attenuate and block any frequencies that are not in the desired range, thus ensuring that the desired signal is received and that no interference is received.

The AFS20A53-1575.42-T3 filter is also designed to have a very wide pass band, which allows the filter to pass signals with frequencies up to the pass band limit without significant attenuation. This is important in applications such as wireless networking, where it is important to be able to receive signals from multiple devices. The wide pass band also allows the filter to be used in applications which require the transmission and reception of signals at multiple frequencies, such as radio navigation systems.

The AFS20A53-1575.42-T3 filter is also designed to have a very low insertion loss, which is important for systems which require high performance. The low insertion loss ensures that the desired signal is received with minimal signal degradation. This is important for applications which require accurate and reliable data transmissions, such as in wireless communications and radio navigation systems.

The AFS20A53-1575.42-T3 filter is also designed to be highly temperature stable, which is important for systems which require reliable performance in a variety of environmental conditions. The temperature stability ensures that the filter will perform reliably, even in extreme temperatures.

The AFS20A53-1575.42-T3 filter is a very versatile and reliable SAW filter designed for use in the 2.4GHz ISM band. It is designed to have a very wide pass band, low insertion loss and high temperature stability, and can be used in applications which require reliable signal reception and transmission. The filter is a perfect solution for a variety of wireless, broadcast and navigation applications.

The specific data is subject to PDF, and the above content is for reference