Allicdata Part #: | 1949-1034-ND |
Manufacturer Part#: |
AFS3-02000800-09-10P-4 |
Price: | $ 1.39 |
Product Category: | RF/IF and RFID |
Manufacturer: | L3 Narda-MITEQ |
Short Description: | AFS AMPLIFIER 2.0-8.0 HGZ |
More Detail: | RF Amplifier IC General Purpose 2GHz ~ 8GHz Module |
DataSheet: | AFS3-02000800-09-10P-4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 1.26000 |
Series: | AFS |
Part Status: | Active |
Frequency: | 2GHz ~ 8GHz |
P1dB: | 10dBm |
Gain: | 26dB |
Noise Figure: | 0.9dB |
RF Type: | General Purpose |
Voltage - Supply: | 15V |
Current - Supply: | 125mA |
Test Frequency: | -- |
Package / Case: | Module, SMA Connectors |
Supplier Device Package: | Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Amplifiers
RF amplifiers are digital circuits that are designed to amplify the power of an incoming RF signal. They are generally used to increase the level of an RF signal that is too weak to pass through a device or transmission line. An RF amplifier can also be used to improve the signal-to-noise ratio of an RF signal. In addition, RF amplifiers can also be used to improve the selectivity of a signal.
AFS3-02000800-09-10P-4 is a high-power amplifier used for various radio frequency (RF) applications, including Amateur radio, shortwave and VHF/UHF wireless communications, digital audio and television broadcasting, medical imaging, navigation, and space communications. The amplifier features an input power range of 0 - 4 watts, a typical output power of 18 watts, and a gain of 17.3 dB. The amplifier is designed to provide reliable and distortion-free performance at frequencies up to 700 MHz.
The working principle of the AFS3-02000800-09-10P-4 amplifier is based on a wideband push-pull amplifier design. This type of amplifier has both the output and the input signals connected to the same power supply. A differential transistor amplifier is used in this kind of configuration, where the transistors are biased to equal and opposite operating points. This design allows for a higher saturation current than other amplifier designs, making it efficient and improving its overall reliability.
The amplifier uses a differential input stage to improve linearity and reduce distortion. The input signal is amplified by the differential amplifier and then fed to the power amplifier stages. The power amplifier is designed to provide a high gain and low noise performance. The amplifier also features a low noise figure and low distortion, which makes it suitable for a variety of applications. The amplifier is designed to provide stable performance and is able to handle wide variations in input power.
The AFS3-02000800-09-10P-4 amplifier is a cost-effective solution for a variety of RF applications, from Amateur radio to medical imaging and navigation. It uses a wideband push-pull amplifier design to provide efficient, reliable and distortion-free performance at frequencies up to 700 MHz. The amplifier is designed to provide a high gain and low noise performance, making it suitable for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
AFS374E | Abracon LLC | 0.54 $ | 2000 | FILTER SAW 374MHZ 8SMD |
AFS315E | Abracon LLC | 0.54 $ | 1000 | FILTER SAW 315MHZ 8SMD |
AFS390E | Abracon LLC | 0.76 $ | 1000 | FILTER SAW 390MHZ 8SMD |
AFS303.825E | Abracon LLC | 0.54 $ | 1000 | FILTER SAW 303.825MHZ 8SM... |
AFS3-02000800-09-10P-4 | L3 Narda-MIT... | 1.39 $ | 1000 | AFS AMPLIFIER 2.0-8.0 HGZ... |
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...