AH180N-WSG-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Magnetic sensors or switches switch from off to on, as soon as a predetermined magnet field strength is exceeded. This is used for applications such as safety switches, reed switches and non-contact switches in automation and robotics. The AH180N-WSG-7 is one type of magnetic sensor or switch.

The AH180N-WSG-7 is an open frame reed switch that detects proximity to a magnet. It activates in the presence of a magnet field at 4.8 Gm to 5.7 Gm (0.48 to 0.57 Tesla) and is deactivated or switched off when the magnet field decreases below this range. The switching process takes place in an extremely short time period between 4 to 8 milliseconds.

Due to its fast switching speed, the AH180N-WSG-7 is ideal for use in applications that require prompt response time, such as, robotics. In addition, the AH180N-WSG-7 is suitable for use in moderate to harsh environmental conditions, temperatures as low as -40°C and as high as +125°C.

The AH180N-WSG-7 is easy to install and consists of a 2 wire connection lead and a snap fastener. The leads carry alternating current of circuit devices, and the snap fastener allows the device to be snapped and fixed into place quickly. The AH180N-WSG-7 is suitable for use with either 24 V AC/DC or 240 V AC/DC.

The AH180N-WSG-7 has a range of application fields such as industrial automation, safety switches, medical equipment, door and window sensors, access control, vending machines, robotics and other areas that require non-contact switch activation.

The working principle of the AH180N-WSG-7 is also quite simple. When a magnet is placed in close proximity to the switch, a current will begin to flow through it. The current will then increase with the strength of the magnetic field, up to a maximum of 4.8 Gm to 5.7 Gm. This increase in current will activate the switch, and the device will turn on.

When the magnetic field begins to decrease, the current flow will drop, and the switch will turn off. The switch will remain off until the magnetic field strength increases again, and the process will begin again. The AH180N-WSG-7 is designed to operate with very little power consumption, making it ideal for use in battery operated applications.

In conclusion, the AH180N-WSG-7 is a reliable, cost effective, open frame reed switch that detects proximity to a magnet. Its fast switching speed and wide range of applications make it ideal for use in robotic and industrial automation systems. The simple working principle means it is easy to install and operate and requires very little power consumption.

The specific data is subject to PDF, and the above content is for reference