AHN223X1N

Power Relays, Over 2 Amps

The AHN223X1N is a power relay system that is designed to handle more than 2 Amp loads. It provides a variety of features to facilitate its wide range of applications. This article will discuss the application field of the AHN223X1N and its working principle.

Application Field

The AHN223X1N power relay system is designed for a wide range of applications, such as motor control, AC switching, and general loads. This product has a maximum voltage rating of up to 220VAC and is rated for 10A continuous and 20A intermittent. It is also suitable for controlling loads such as lights, motors, solenoids, resistive, inductive, and capacitive loads.

This power relay system also features a wide range of operating temperature and related environmental requirements. It can be used in temperatures ranging from -20°C to 50°C. Additionally, it is moisture resistant and can operate in environments where the temperature and humidity could pose a risk to other systems.

Working Principle

The AHN223X1N is a single-pole switch with three latching functions. It is connected to the control device using a 3-wire cable and the signal is input at the terminals, enabling the system to activate the relays. These relays can be used to switch between two different status: ON and OFF, allowing the system to turn on and off the load, as required.

The AHN223X1N also features a LED indicator for basic load status, which is connected to the relays via terminals 4 and 8. This LED will be OFF while the relay is OFF and will light up when the relay is turned ON. This LED also serves as a diagnostic indicator for troubleshooting.

The AHN223X1N also has a series of features to reduce and prevent arcing and reduce power consumption. It is designed with metal oxide varistors to prevent surge voltages and has a coil damping resistor to minimise electromagnetic interference. Additionally, it features a dielectric strength of 2000VAC, which ensures that no sparking occurs when switching the relay.

The AHN223X1N is available in a variety of form factors to meet a wide range of applications. It is available in single or double-pole configurations and is also available with snap-in or screw mounting. It also features a wide range of protections and certifications, such as CE, UL, and RoHS.

Conclusion

The AHN223X1N is a power relay system designed for a wide range of applications. It is designed for 10A continuous and 20A intermittent loads with a maximum voltage rating of up to 220VAC. It is also moisture resistant and features metal oxide varistors to prevent surge voltages, as well as a series of other features. This power relay system is available in various form factors and protections to meet different application requirements.