ALS70G274NJ040

Polarization:	Polar
Package / Case:	Radial, Can - Screw Terminals
Mounting Type:	Chassis Mount
Surface Mount Land Size:	--
Height - Seated (Max):	4.606" (117.00mm)
Size / Dimension:	3.031" Dia (77.00mm)
Lead Spacing:	1.252" (31.80mm)
Impedance:	9 mOhms
Ripple Current @ High Frequency:	29.6A @ 10kHz
Ripple Current @ Low Frequency:	28.5A @ 100Hz
Applications:	General Purpose
Ratings:	--
Series:	ALS70
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	5000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	9 mOhm @ 100Hz
Voltage - Rated:	40V
Tolerance:	±20%
Capacitance:	270000µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are widely used in various applications because of their unique properties. They store electrical charges and when a voltage is applied to them, they release the charge and conduct electrical current.The ALS70G274NJ040 is an Aluminum Electrolytic Capacitor that has a wide range of applications, such as switching power supplies, motor drive systems, and other DC-DC converters, as well as various audio circuits. In addition to these applications, it can also be used in high-frequency circuits, light-emitting diode (LED) drivers, and other general circuits.The ALS70G274NJ040 is a two-pin, radial leaded aluminum electrolytic capacitor, which is capable of storing relatively large amounts of charge as compared to other types of capacitors. It has a rated voltage of 25V and a maximum capacitance of 22μF. The capacitor is designed with an anode and a cathode, which create a potential for an electric current to pass through when a voltage is applied across them. The electrolytic capacitor has two very small plates separated by an insulating material such as paper or aluminum oxide. The electrolyte contained between these plates allows the capacitor to store a large amount of electrical charge.The working principle of the aluminum electrolytic capacitor is relatively simple. When a voltage is applied to the capacitor, the positive plate attracts negative charges while the negative plate attracts positive charges. These charges are then collected on the plates which causes a potential difference. This potential difference creates a type of "push-pull" of the charges which results in the capacitor being able to absorb and store charge. When a voltage is applied again, the capacitor releases the stored charge and the process is repeated.The ALS70G274NJ040 is a great choice for a variety of applications due to its relatively low price, low ESR, and its ability to handle relatively high voltages. The capacitor is also relatively small and easy to install which makes it highly versatile. In addition, the capacitor has a very good temperature range which makes it reliable even under extreme temperatures. As such, it can be used in both professional and consumer electronics applications.In conclusion, the ALS70G274NJ040 is an optimal solution for a wide variety of applications due to its relatively low price, low ESR, ability to store large amounts of charge, and its versatility. Its two-pin, radial leaded design makes it easy to install and its good temperature range makes it reliable even under extreme conditions. This capacitor is recommended for a variety of circuits ranging from power supplies to audio circuits to LED drivers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description