ALS70U622NF450

Polarization:	Polar
Package / Case:	Radial, Can - Screw Terminals
Mounting Type:	Chassis Mount
Surface Mount Land Size:	--
Height - Seated (Max):	4.213" (107.00mm)
Size / Dimension:	3.031" Dia (77.00mm)
Lead Spacing:	1.252" (31.80mm)
Impedance:	25 mOhms
Ripple Current @ High Frequency:	22.2A @ 10kHz
Ripple Current @ Low Frequency:	15.6A @ 100Hz
Applications:	General Purpose
Ratings:	--
Series:	ALS70
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	5000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	37 mOhm @ 100Hz
Voltage - Rated:	450V
Tolerance:	±20%
Capacitance:	6200µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors have become popular due to their convenience, high capacitance, and low cost. The ALS70U622NF450 is an example of an Aluminum Electrolytic Capacitor that is used in many applications. This part is a non-polarized, snap fit type and is highly recommended as a capacitor for SMD applications. The ALS70U622NF450 is often used in various power supply regulator circuits as well as in several switching power supply circuits and general purpose applications. It is also used in computerized logic circuits where its robustness and stability are an important factor in the overall system\'s performance.The working principle of the ALS70U622NF450 is quite simple. The capacitor is made up of two conductive plates separated by a dielectric material. The dielectric material is usually an aluminum oxide. The two electrodes of the capacitor are usually made of aluminum foil and an electrically conducting liquid electrolyte. As current flows between the two electrodes, electrons are collected from the electrolyte on one of the electrodes. This causes a reaction, which creates a layer of dielectric between the plates. This layer of dielectric controls the amount of current that flows between the two electrodes and determines the capacitance value.The capacitance of the ALS70U622NF450 varies from 0.1uF to 330uF and is rated at 75V DC. The Electrostatic Capacitance is 80,000μF/cm2 and the Leakage Current is 1.0mA or less at 25°C. The temperature range for operation spans from -40°C to +105°C and is highly stable in wet and moist conditions. The capacitance also remains stable with changes in voltage and temperature, and there is no substantial aging of the capacitor.The ALS70U622NF450 is suitable for numerous applications because of its high capacitance, low current leakage rate, and excellent operating temperature range. It can be used in power supply regulators, as well as in a variety of switching power supplies, inverters, and general purpose circuits. Its advantages include a low profile package, high volumetric efficiency, and excellent stability in terms of capacitance and ESR. In addition, the snap fit type allows for easy mounting and ensures good contacts with the solder pads. The ALS70U622NF450 is RoHS compliant and UL certified. It is known for its robust design and reliability. It is a cost-effective solution for a variety of applications requiring high capacitance and long life. Overall, the ALS70U622NF450 is an excellent choice for a wide range of electronic applications. Its high capacitance, excellent stability in terms of capacitance and ESR, and low leakage current all contribute to its reliability and make it an ideal choice for various power supply regulator and switching power supply circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description