ALS71A332DA100

Polarization:	Polar
Package / Case:	Radial, Can - Screw Terminals
Mounting Type:	Chassis Mount
Surface Mount Land Size:	--
Height - Seated (Max):	2.126" (54.00mm)
Size / Dimension:	1.417" Dia (36.00mm)
Lead Spacing:	0.504" (12.80mm)
Impedance:	81 mOhms
Ripple Current @ High Frequency:	9.3A @ 10kHz
Ripple Current @ Low Frequency:	6.6A @ 100Hz
Applications:	General Purpose
Ratings:	--
Series:	ALS71
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	11000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	99 mOhm @ 100Hz
Voltage - Rated:	100V
Tolerance:	±20%
Capacitance:	3300µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors offer high capacity and are widely used in electrical and electronic devices. The ALS71A332DA100 is a type of aluminum electrolytic capacitor that has a range of applications and a distinct working principle. This aluminum electrolytic capacitor is available in two models: leaded and leadless. The leaded model has two external pins for connection to a circuit board while the leadless model has no external pins and must be soldered directly onto the circuit board. The ALS71A332DA100 has an insignificant impedance compared to other capacitors with the same capacitance and is also has a low ESR. These characteristics give this capacitor the ability to provide power to circuits or components for a very short time on demand and it also provides a good transient response with no time constant.The ALS71A332DA100 is widely used in computers, communication systems, consumer electronics, automotive electronics, and power supplies. It is also used in DC to DC converters, power factor correction circuits, LCD display backlights, digital audio amplifiers, switched mode power supplies, and more.The way in which this aluminum electrolytic capacitor works is quite unique. It consists of two metal electrodes that are etched into an insulated aluminum foil. The positive electrode is etched onto one side of the aluminum foil while the negative electrode is etched onto the other side. The foil is then rolled into a cylinder with the electrodes facing each other and inserted into a metal cylinder. The metal cylinder is then filled with an electrolyte which consists of an acid, organic solvent, and other substances. This electrolyte acts as a dielectric and has a higher dielectric strength than air, allowing the capacitor to store more charge.The electrodes of the capacitor act like plates of a Leyden jar and when a voltage is applied, the positive electrode is attracted to the negative electrode and a current flows through the electrolyte. As the current passes through the electrolyte, it leaves a charge on the electrodes. When the current stops flowing, the charge remains on the electrodes creating an electric field across the dielectric. This electric field will remain between the electrodes until the capacitor is discharged.In conclusion, the ALS71A332DA100 aluminum electrolytic capacitor is versatile and widely used in a variety of applications. The unique way in which it works, by utilizing the electrolyte in the metal cylinder to store a charge on the electrodes when a voltage is applied, makes it a great choice for applications that require a high capacity and transient response.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description