AP1501A-K5G-13

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Function:	Step-Down
Output Configuration:	Positive
Topology:	Buck
Output Type:	Adjustable
Number of Outputs:	1
Voltage - Input (Min):	4.5V
Voltage - Input (Max):	40V
Voltage - Output (Min/Fixed):	1.23V
Voltage - Output (Max):	37V
Current - Output:	5A
Frequency - Switching:	150kHz
Synchronous Rectifier:	No
Operating Temperature:	-20°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	TO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Supplier Device Package:	TO-263-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Voltage Regulators - DC DC Switching RegulatorsA DC-DC switching regulator is an electrical component that converts an input direct current to a higher or lower output direct current. It is usually used as a DC to DC power supply for various applications including but not limited to industrial, automotive and consumer. One of these devices is the AP1501A-K5G-13, which is a low noise, low quiescent current, low voltage dropout regulator module that integrates a 380mV reference voltage, a 400mV sense voltage, an enable control and a high current NPN transistor in a low profile 16 pin package.The explanation of the device’s operation is as follows: When an input voltage applied to the input pin (Vin) is higher than the set voltage (Vref) at the reference pin, then the internal circuit (comparator) will activate the NPN transistor which will start to draw current from the input. This will cause the input current to be reduced until the output voltage reaches the desired level. The output voltage is externally regulated by changing the voltage applied at the reference pin.The main feature of this module is that it is designed to provide high efficiency on different input and output voltages. The module has a low noise operation, its quiescent current is below 10uA and its low voltage dropout of only 380mV. It also comes with an optional active low enable control pin which allows for power saving in standby mode.The AP1501A-K5G-13 is suitable for various applications such as powering a low voltage processor, powering instrumentation and other low voltage components. It is also commonly used in portable electronics, consumer electronics and industrial applications.This module can be easily used in a variety of different applications, due to its low voltage dropout and quiescent current, high output current and high efficiency. The device also has a wide input voltage range (up to 36V), making it suitable for a variety of power systems.In conclusion, the AP1501A-K5G-13 is a highly reliable, efficient and low power DC-DC switching regulator module that is suitable for a variety of applications such as powering processors, instrumentation and any other low voltage component. It is easy to use and comes with a variety of features including its low voltage dropout and quiescent current, high output current, wide input voltage range and optional enable control pin. This makes it a great choice for those looking for a reliable and efficient power source.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description