AP2280-2WG-7 Integrated Circuits (ICs)

Voltage - Supply (Vcc/Vdd):	Not Required
Base Part Number:	AP2280
Supplier Device Package:	SOT-25
Package / Case:	SC-74A, SOT-753
Operating Temperature:	-40°C ~ 85°C (TA)
Fault Protection:	--
Features:	Load Discharge, Slew Rate Controlled
Input Type:	Non-Inverting
Rds On (Typ):	80 mOhm
Current - Output (Max):	2A
Series:	--
Voltage - Load:	1.5 V ~ 6 V
Interface:	On/Off
Output Type:	P-Channel
Output Configuration:	High Side
Ratio - Input:Output:	1:1
Number of Outputs:	1
Switch Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AP2280-2WG-7 Application Field and Working Principle

AP2280-2WG-7 is a power management integrated circuit (PMIC) from Diodes AP2280 Family. This multi-channel low-side solid-state power distribution switches, load drivers and reverse current protection devices can be used in different types of applications ranging from regulated DC/DC converters and linear applications for distributed power distribution and supplies. The AP2280-2WG-7 integrates two low-side switches and four load drivers to provide flexible and reliable power distribution and protection. Each switch is capable of delivering up to 12 A average load current with a maximum peak current of up to 15 A. The load drivers provide up to 500 mA of protection. All switches and drivers can be controlled individually or all together by an enable or global enable pin. The AP2280-2WG-7 is designed to protect against reverse currents by disabling the system in case of accidental reverse voltage. It also integrates a current limit and short circuit protection (SCP) function, allowing you to set the threshold current at which the system is disabled. All these features provide robust and reliable power distribution and protection for your system.The AP2280-2WG-7 also has soft start and brown-out protections which ensure that the system starts without causing any overshoot or transients which could otherwise damage the sensitive components of the system. It also integrates a slew rate control to reduce inrush current and prevent potential overcurrents. The AP2280-2WG-7 is available in a World-Wide QFN 3 x 3 mm package and operates over a wide temperature range from -40 °C to 125 °C. It offers low on-resistance and low quiescent current. The high-frequency operation also reduces power losses and increases efficiency.In summary, the AP2280-2WG-7 is a multi-channel low-side solid-state power distribution, load drivers and reverse current protection device, which is suitable for a variety of applications. It provides robust and reliable power distribution, protection and control. The device is small in size, has a wide operating temperature range and is capable of delivering high performance and power efficiency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description