AP22811BW5-7 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AP22811BW5-7 is an analog controller with a power distribution switch, load driver, and power management integrated circuit (PMIC). It is designed to be used in embedded systems, and is especially suitable for controlling an output port that is subject to high current draw or loading. It is also suitable for use in low-voltage (3.3V) circuits as a current shunt device.

In terms of application field, the AP22811BW5-7 enables output port current tracking. It can provide up to 300mA for output port current limiting, thereby protecting the system from accidental over-current and over-voltage events. It also has the capability to drive a single output port at up to 5A, which can provide an ideal power source for high speed devices such as FPGAs. In addition, its built-in 12-bit ADC can provide process control over temperature and current, enabling precision control over the output port\'s power level.

In terms of working principle, the AP22811BW5-7 has two main components: an analog controller and a power distribution switch. The analog controller is responsible for providing the necessary control signals needed to initiate the power distribution switch. It does this by using two separate analog inputs to measure current and voltage, based on the voltage and current relationship established between its two outputs. These two outputs are then compared against the programmed maximum output current and voltage limit by the analog controller. If the calculated limit is exceeded, the analog controller will disable the power distribution switch and turn off the output port.

The power distribution switch then connects the output port with the power source and controls the output port\'s current and voltage. By controlling the output port\'s current and voltage, the power distribution switch ensures that the correct current is supplied and that the correct output port power level is achieved. Once the power distribution switch is completed with its programming, it will remain active until either the power source is switched off or the analog controller is triggered, disabling the output port.

In short, AP22811BW5-7 is a PMIC designed for use in embedded systems, offering current and voltage monitoring and output port current tracking for both high and low-voltage (3.3V) circuits. Its built-in ADC provides precise control over the output port’s power level and its power distribution switch can provide up to 5A for an ideal power source for high speed devices such as FPGAs. Overall, it is an ideal PMIC for anyone looking for high current and voltage control in an embedded system.

The specific data is subject to PDF, and the above content is for reference