AP393NG-U

Current - Output (Typ):	16mA @ 5V
Base Part Number:	AP393
Supplier Device Package:	8-PDIP
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Operating Temperature:	0°C ~ 70°C
Hysteresis:	--
Propagation Delay (Max):	--
CMRR, PSRR (Typ):	--
Current - Quiescent (Max):	2.5mA
Series:	--
Current - Input Bias (Max):	0.25µA @ 5V
Voltage - Input Offset (Max):	5mV @ 3V
Voltage - Supply, Single/Dual (±):	2 V ~ 36 V, ±1 V ~ 18 V
Output Type:	CMOS, DTL, ECL, MOS, Open-Collector, TTL
Number of Elements:	2
Type:	General Purpose
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AP393NG-U Linear – Comparators

The AP393NG-U is a type of linear comparator which is based on its CMOS technology, enabling low-current operation. It is a highly integrated device with a single low-voltage power supply and a common ground. The AP393NG-U can be used for various applications such as switchgear, process control, monitoring and protection, and programmable logic control.The AP393NG-U is a logic-controlled, bi-directional, multi-bit switch which can be used for analog or digital signal processing. It has four logic states, namely, “off”, “low”, “high”, and “open”. The “open” state is used to detect an abnormal input signal and can be used as a reference level for the output to be adjusted according to the specific requirements. The AP393NG-U has a wide range of input and output voltages, supports a high level of current drive, and is capable of working with both analog and digital signals.The core of the AP393NG-U is powered by a single 12V power supply and includes a CMOS-based logic circuit which is connected with two comparators. In the comparison between two signals, the two comparators generate a “high” or a “low” output, depending on the state involved. The comparison between two signals can be either linear or constant. The linear characteristic of the comparison enables precision and accuracy to be achieved.The AP393NG-U is based on an open-loop design. This means that it is connected to an outside source and the output is derived from the input. The operation of the device is based on the sum of the inputs, which are measured and compared. If the sum is above a certain threshold, the output turns to “high”, and if the sum is below the threshold, the output turns to “low”. Once the comparison is made, the output will stay in the same state until the input signals change.The AP393NG-U also includes a load switch. The load switch is used to control the current draw of the device. When the switch is “open”, the load current is reduced and the device runs at a lower power rating. When the switch is “closed”, the load current is increased and the device runs at a higher power rating. The AP393NG-U allows for both single-ended and differential mode operation. In single-ended mode, the input signals are connected to the comparator A, while in differential mode all four inputs are connected to the two comparator channels. This allows for two different types of comparison – one with a reference input and the other with an OP Amp or a DAC.The AP393NG-U is a powerful and precise comparator which can be used for a variety of applications. It is suitable for use in various industrial and consumer applications and has been widely used in process control, switchgear, monitoring and protection, and programmable logic control. The device is highly integrated and offers low current operation, making it well suited to low-power applications. The AP393NG-U is an ideal choice for use in demanding industrial environments and its precision and accuracy make it a reliable and flexible choice for any application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description