AR4PDHM3/87A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AR4PDHM3/87A is a single phase diode rectifier with non-zero voltage switching (NZVS). It is mainly used in the fields of renewable energy generation, power grids, traction systems, energy storage, and more. The AR4PDHM3/87A diode rectifier is a cost effective solution for a wide variety of renewable energy applications.

The AR4PDHM3/87A is typically used as a single phase bridge rectifier, which consists of four separate diodes connected in two legs. One leg is the anode, and the other the cathode. The two legs form the bridge rectifier and provide a full wave rectification. With this bridge rectifier, the forward voltage drop of the diode is essentially zero, meaning that the output is a continuous, near-dc current. This also results in higher efficiency, since current is not required to flow through a resistor.

In addition to providing a full wave rectification, the AR4PDHM3/87A is also capable of providing a non-zero voltage switching (NZVS) functionality. This is achieved by controlling the voltage polarity of the bridge rectifier with a switching device, such as a bipolar transistor. This allows the rectifier to switch between two separate voltages, which is useful for applications such as frequency-converter rectifiers or solar inverters.

The AR4PDHM3/87A is also an ideal choice for traction systems, since it can provide a soft switching solution. This is achieved by controlling the voltage of the bridge rectifier with an external controller. The controller can then turn on and off the bridge rectifier depending on the application requirements, thus providing a soft switching effect. This allows for improved performance and smoother operation of the traction system.

The AR4PDHM3/87A is also capable of providing power grid protection and energy storage applications. In these applications, the rectifier can be used in conjunction with other components, such as a transformer and a capacitor, to control the input current, or to store and release energy. The rectifier also provides a superior surge protection capability, as it can protect large loads and appliances from voltage spikes.

In conclusion, the AR4PDHM3/87A diode rectifier is an ideal solution for a wide variety of renewable energy applications. It is a cost effective, single phase diode rectifier with non-zero voltage switching, which provides a full wave rectification and a soft switching solution. It is also suitable for applications such as power grid protection and energy storage. The rectifier is also capable of providing a high surge protection capability, making it an ideal choice for traction and other applications.

The specific data is subject to PDF, and the above content is for reference