AS1705-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AS1705-T linear amplifier is a hybrid, single-channel amplifier which is capable of delivering maximum power at both 4 ohms and 8 ohms when in bridge mode – 8 ohm operation yields 34W (into 8 ohms, 16.5 dBW) and 4 ohm operation yields 40W (into 4 ohms, 17.5 dBW).

The unit has one input, with a balanced input connection made using the supplied 3..5mm TRS jack. It requires external power, with a current requirement of 1.5A at 12VDC. The unit has two outputs, one for the positive and one for the negative, with 4mm banana head connectors. The output impedance has been designed to minimize the effect of reactive loads and ensure reliable operation even over long cables.

The AS1705-T features a low distortion and noise design, with a signal-to-noise ratio of > 95dB and total harmonic distortion of < 0.1%. The frequency response is 20Hz-30KHz ±3dB, suitable for a wide range of applications. The low distortion and noise make the AS1705-T suitable for the most demanding audio applications, such as studio recording and critical listening.

The AS1705-T has a number of user-adjustable controls to optimize the sound. These include a gain control ranging from 0-20dB, a signal balance control, a low-cut filter and a signal-monitor/LED. The gain control allows the user to set the signal strength between the input jack and the output jack. The signal balance control allows the user to optimize the signal for the best possible stereo image, and the low-cut filter allows the user to filter out low-frequency noise and hum. Finally, the signal monitor/LED gives an indication of the strength of the incoming signal.

In terms of operation, the AS1705-T is relatively straightforward. The input is connected to the source and the output is connected to the target. The gain and other adjustments are then set according to the application. For most audio applications, the gain should be set at the maximum level and the signal balance should be adjusted for maximum stereo imaging. The low-cut filter should be adjusted for the application to filter out background noise, and the signal monitor/LED should be regularly monitored.

The AS1705-T linear amplifier is an ideal solution for any audio-video application that requires maximum power at both 4 ohms and 8 ohms. It offers low distortion, low noise, and adjustable controls for optimal tuning of the audio signal. This makes the AS1705-T suitable for applications such as home theater systems, studio recordings, car audio systems, and other critical listening environments.

The specific data is subject to PDF, and the above content is for reference