AT21CS01-STUM12-T Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT21CS01-STUM12-T is a 2Kb (Kilobyte) Serial EEPROM Memory product. This is a serial non-volatile memory device manufactured by Microchip. The product is suitable for those applications where size, cost, power consumption and speed considerations are important.

The AT21CS01-STUM12-T has a small 8-pin SOIC package and provides 2K bits of non-volatile storage. It includes an onboard charge pump and integrated level shifters which allow the device to operate over a wide range of supply voltage (1.8V to 5.5V).

The AT21CS01-STUM12-T can be used in many applications like automotive, measurement, and medical. It is used for storing settings, calibration data, and system and component configurations. This product meets automotive standards and is rated for an operating temperature from -40 to +125 degrees C.

The memory is accessed via an industry standard I²C serial interface, also known as a two-wire serial bus. This bus can be used to communicate with a wide variety of peripherals. The I²C bus consists of two lines, Serial Data Line (SDA) and Serial Clock Line (SCL). Two devices are typically connected to the bus, one as a master and the other as a slave. The master device is the one that generates the clock, while the slave device is the one that is addressed by the master and is the one that is accessed by the master.

The AT21CS01-STUM12-T includes a two-wire serial interface that can run up to 400 Kbps and can generate interrupt signals when requested data is received. The device is also able to enter low-power modes when not in use.

The AT21CS01-STUM12-T provides 8-bit Extended Addressing Mode, from I²C slave address 0x50, which allows the user to write to different memory regions on the chip. The data that is stored in each memory region is organized as 32 bytes (read and written in blocks at a time). It also provides Sequential Byte Write/Read which allows up to 256 bytes to be written or read from the memory, in sequential order.

The AT21CS01-STUM12-T memory device is a non-volatile storage solution that is fast, low power and easy to use. Its small size, low cost and range of features make it a great choice for many applications.

The specific data is subject to PDF, and the above content is for reference