AT24C02-10PI-2.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AT24C02-10PI-2.5 is a low power and low voltage type of memory that is commonly used in many electronics applications. It is similar to other types of non-volatile memory, such as EEPROM and other SPI-based memories. This memory is ideal for applications requiring low power usage, high speed operation, and compatibility with a wide range of devices.

The AT24C02-10PI-2.5 provides a 2.5 Volt supply to be used as the input for a 3.3 Volts logic level. This allows the device to have the same logic level as other devices at a much lower voltage. The device also has a long retention time, meaning that data will be stored in the memory for an extended period of time. The device is also capable of a wide range of bus speeds up to 1 Mbps.

The main purpose of the AT24C02-10PI-2.5 is to provide a reliable and fast memory storage capability, which makes it the ideal solution for the wide range of applications, such as embedded systems, automotive, industrial and consumer electronics.

The AT24C02-10PI-2.5 is organized into 256 bytes, with each byte including 8 bits. It is able to support multiple data types, such as 8-bit and 16-bit values. The configuration of the memory depends on the device’s mode selection. It can be configured as two-page or four-page mode, both with 8-bit and 16-bit addresses.

The AT24C02-10PI-2.5 has the capability of storing data in multiple memory banks. This means that data can be written to a particular bank and read from the same bank. The banks can be configured in parallel, serial, or dual configuration. The device also includes address and data latch features to save power and reduce latency.

The AT24C02-10PI-2.5 supports two different types of serial communication protocols; the I2C bus protocol and the SPI bus protocol. As the name suggests, the I2C bus protocol is based on a two-wire bus structure. The slave devices are connected to the master device via the I2C bus, and the data is transferred from the master device to the slave devices. The SPI bus protocol, on the other hand, is based on a four-wire bus structure. The slave devices are connected to the master device via the SPI bus, and the data is transferred from the master device to the slave devices.

The AT24C02-10PI-2.5 has various advantages in data storage, including fast data access times, high endurance, low power consumption and high reliability. The memory cell is completely erased when the power is removed, meaning that the data stored in the memory will remain safe even if the power supply shuts down.

The AT24C02-10PI-2.5 is an ideal memory solution because of its versatility, low power usage and reliable performance. Its two different serial communication protocols, I2C bus and SPI bus, provide a way to integrate the device in different systems without any compatibility issues. It can be used in a wide range of applications, such as embedded systems, automotive, industrial and consumer electronics. Its ability to offer high endurance and low power consumption makes it one of the most reliable and robust solutions for data storage.

The specific data is subject to PDF, and the above content is for reference