AT24C08A-10PC-1.8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory: AT24C08A-10PC-1.8 Application Field and Working Principle

AT24C08A-10PC-1.8 is a non-volatile memory integrated with EEPROM manufactured by Microchip Technology and is also known as the I²C Interface EEPROM. The I²C Interface EEPROM is a 2-wire serial bus device with an 8-bit wide data bus and a 2-pin serial clock signal CLK. The AT24C08A-10PC-1.8 is a low-cost, low-power EEPROM device capable of storing 8 bits of data in each of its 8-pin packages. The integrated EEPROM supports read and write operations with a data bus width of 8 bits and a clock frequency of 1 MHz.

The AT24C08A-10PC-1.8 has a wide range of applications ranging from automotive systems, medical devices, industrial and audio applications, hand-held and mobile devices, and even home automation systems. The device is also ideal for applications requiring high reliability and extensive read/write capability. The RST pin enables a reset operation when a logic driven low. This reduces the power up clear time typical of EEPROMs. Having an 8-bit wide data bus, the device allows for both software and hardware controlled data transmission. The EEPROM clock signal is buffered for timing propagation delays.

Moreover, the AT24C08A-10PC-1.8 is capable of operating with a specified minimal power supply of 1.8V and a maximal power supply of 5.5V. The device is available in either 8-pin or 10-pin packages and can tolerate temperatures between -40°C and +85°C. It has a program execution time of 100µs, an ID number (8 bits) and a device address (2 bits). The AT24C08A-10PC-1.8 is able to operate at high bit-rates, up to 1MHz and is packaged in a space-saving package.

The working principle of the AT24C08A-10PC-1.8 is fairly simple. The device is connected to an external processor\'s I/O port and the control is facilitated by a serial clock signal, SCL. When the device is turned on, the processor sends a start signal after which data is read or written to the memory. The data can be written to or read from 8 different addresses in the memory with the help of the counter and the SCL signal. The data is read from the address and transmitted in serial format from the device. Once the data is read, the address counter is incremented and new data is read. This cycle continues until all locations have been read or written.

The AT24C08A-10PC-1.8 EEPROM has the following characteristics: an operating voltage of 1.8V to 5.5V; an I²C serial interface; scratch pad memory for storing system configurations; a reset pin for adjusting the power up clear time; a device address of two or three bits; an 8-bit ID number; and a program execution time of up to 100µs. The device is ideal for applications which require low power and high reliability, as well as extensive read and write capability. The AT24C08A-10PC-1.8 is packaged in either 8-pin or 10-pin packages and can operate in temperatures between -40°C and +85°C.

In conclusion, the AT24C08A-10PC-1.8 is an ideal EEPROM device for applications such as automotive systems, medical devices, industrial and audio applications, hand-held and mobile devices, as well as home automation systems. The device is also capable of operating at high bit-rates and is equipped with a reset pin feature which allows for a reset operation when a logic low is driven. The device can operate in temperatures between -40°C and +85°C and is available in either 8-pin or 10-pin packages.

The specific data is subject to PDF, and the above content is for reference