AT28C040-25FI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AT28C040-25FI belongs to a type of integrated circuit (IC), more specifically to the family of memory chips. This chip is composed of four thousand bytes of E2PROM, an abbreviation for Electrically Erasable Programmable Read-Only Memory. This type of memory is primarily used for the storage of information that may need to be changed at a later time. The AT28C040-25FI memory chip is often used for control functions, such as storing firmware or data in embedded microprocessors. It has been used in a variety of ways, including in consumer electronics, automobiles, automotive parts, and industrial control systems.

The AT28C040-25FI chip is composed of a single chip of 8-bit memory cells, designed as 4096 bytes of E2PROM. The chip is organized as 256 words of 16 bits each. The E2PROM cells on the memory chip can be programmed and erased electrically. Each cell consists of two transistors, two resistors, two capacitors and two fuses. A standard operating voltage of 5V is used for the AT28C040-25FI. All of the pins on the memory chip are input/output pins – CAN, WE, OE, RESET, A0-A13, DQ0-DQ15 and VCC. These pins can be used to program and erase the E2PROM cells on the chip.

The working principle of AT28C040-25FI memory chip is straightforward. Firstly, data is written to the memory chip by applying a high logic level to the write enable (WE) pin and applying appropriate voltage levels to the A0–A13 address pins and the DQ0–DQ15 data pins. If a high logic level is applied to the chip enable (CE) pin, the data is written to the memory cell. The programming process is performed by the application of a programming voltage to the PGM pin. Once the programming has been completed, a toggle of the WE and/or OE pins returns the memory to a read mode.

The AT28C040-25FI memory chip is then erased by the application of a series of pulses to the bulk erase (BE) pin. The bulk erase process is performed by the application of a high voltage (typically 12V or higher) to the BE pin. Once the erase process has been completed, the chip is returned to a normal operating mode by the application of a low logic level to the BE pin.

The AT28C040-25FI memory chip is widely used in a variety of applications where the amount of memory required is relatively small. It has been used in cars and other vehicles to store data related to engine, transmission, and other control functions. It has also been used in industrial control systems to store settings, program instructions, and other data related to machine operation. It is also widely used in consumer electronics products (such as digital cameras and MP3 players) and other small form factor devices. The AT28C040-25FI’s small form factor and cost effectiveness have made it an attractive choice for many memory intensive applications.

The specific data is subject to PDF, and the above content is for reference