AT29C040A-10PC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT29C040A-10PC Memory

AT29C040A-10PC is a 4-megabit, low-voltage, parallel EEPROM memory device. This device is a combination of a 1 megabyte memory array and a small set of non-volatile control registers. It is composed of a 1 megabyte array of 40 ns or faster EEPROM cells organized as 2048 blocks of 512 bytes. It is programmed and read serially via a 3-wire serial communications protocol from an external microcontroller.

An important feature of the AT29C040A-10PC is that it supports program and read operations from a voltage range of 2.7 to 3.6 volts. This feature makes it suitable for use in applications where it is necessary for low-power operations such as battery-powered systems and embedded applications. The device has a 5, 10, or 20-byte page write buffer that allows several bytes of data to be written in a burst mode into the addressed page.

AT29C040A-10PC Application Fields

The AT29C040A-10PC can be used in a wide range of applications requiring high speed, low-power access to non-volatile memory. These applications include but are not limited to data storage and retrieval, embedded application designs, data logging, embedded controller Firmware, industrial control, automotive applications, and instrumentation systems. It is also suitable for use in other applications where reliable retention of data is required.

AT29C040A-10PC Working Principle

The AT29C040A-10PC uses two control pins, achip select pin (CS) and a write enable pin (WEN). The CS pin is used for accessing the device, and it must be driven low in order to address the device and read the data. The WEN pin is used for writing data to the device, and it must be driven low prior to writing data to the device. The data can then be written directly to the addressed location by driving the data lines with the data you wish to write. Data is also read from the device by driving the CS pin low and then driving the WEN pin high. The data is then driven on the data bus.

The AT29C040A-10PC is designed for low power consumption, with typical power consumption of 25mW for a 40 MHz batch write operation. It also uses advanced programming algorithms to minimize programming times, and its programming characteristics are optimized for fast write and read times. Additionally, this device supports both page mode operation and page mode programming, allowing several bytes of data to be written at once.

The AT29C040A-10PC features a high-speed SPI interface, which is optimized for fast write and read operations. The SPI bus is fast enough to support the current requirements of many embedded applications without the need for a dedicated interface circuit. Additionally, the device has a variable write cycle time, allowing the user to adjust the device’s write-time to suit the particular application.

The AT29C040A-10PC also features advanced security features that can help prevent the data from being lost or corrupted due to power cycling or system failure. It supports a variety of hardware write protect mechanisms that can prevent unauthorized access to the memory array. In addition, the device has an internal software lock system that can prevent the user from writing or erasing the data stored in the device.

The AT29C040A-10PC is a high-speed and low-power memory device designed for use in a wide range of applications. With its combination of advanced programming, security features, and fast access times, this device provides an ideal solution for applications requiring reliable storage and retrieval of data.

The specific data is subject to PDF, and the above content is for reference