AT89C2051-24SU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT89C2051-24SU is an 8-bit microcontroller (MCU) belonging to the Atmel 8051 family. It is mostly used in industrial and commercial applications, including point-of-sale (POS) terminals, remote controls, medical monitoring devices and other applications that require low-power consumption and small memory footprints. AT89C2051-24SU is based on the 16-bit AVR architecture and operates at a maximum clock frequency of 16MHz.The AT89C2051-24SU MCU has 2KB of Flash memory, 128 bytes of RAM and 128 bytes of EEPROM. Its instruction set contains instructions for common operations such as adding or subtracating from a register, an exclusive or of two registers, a bit-test instruction, decrement and compare instructions. The instruction set also includes advanced instructions such as a move instruction, where one operand is the destination of the data and the other is the source. The AT89C2051-24SU can support up to 32 LEDs for lighting or display purposes.The AT89C2051-24SU MCU utilizes an advanced Harvard architecture that combines Flash, RAM and EEPROM on a single chip. This advanced architecture allows the MCU to execute instructions in two separate clock cycles and to access memory addresses directly. The Harvard architecture also allows the user to use bit-wise operation such as bit manipulation and bit shifting efficiently.AT89C2051-24SU MCUs have an integrated 8-bit analog-to-digital converter (ADC) with an input range of 0-2V. This feature allows the MCU to monitor and control the voltage of the devices to which it is connected. The built-in analog comparator of AT89C2051-24SU can detect input voltage levels and compare it with a reference voltage. This feature can be used in motor control, process control, regulated power supplies, etc.The AT89C2051-24SU has an integrated USART serial port that can be used for communication with a PC or other devices. The USART can be programmed for different communication protocols, such as UART, RS-232, SPI, etc. The USART can be used to transfer data from the MCU to the PC, or from the PC to the MCU.The device has two capture/compare/PWM (CCP) modules that can be used to generate and capture pulse-width modulation (PWM) signals. The PWM signals can be used to control motors, servos, as well as analog and digital output devices.The timer/counter T0 and T1 can be used to generate a periodic interrupt. This interrupt can be used to trigger events or functions with a fixed frequency. The timer/counter can also be used to measure pulse width and period, and to generate PWM signals with accurate duty cycles and frequencies.The AT89C2051-24SU MCU also has an integrated serial communication interface (SCI) that can be used to communicate with other devices using the following interfaces: DALI, DMX-512, LIN, and RS-485. The SCI can be used for wireless communications using infrared (IR) and radio frequencies (RF).The AT89C2051-24SU MCU also comes with an integrated hardware watchdog timer (WDT) that can be used to reset the MCU if it becomes unresponsive or enters into an unpredictable state due to software bugs.In summary, the AT89C2051-24SU is an 8-bit microcontroller with a low cost and low power consumption. Suitable for many industrial, commercial and home applications, it has a range of features such as Flash, RAM and EEPROM memories, USART, SCI and CCP modules, timers, and a WDT. Its extensive instruction set gives it the ability to efficiently execute instructions for basic operations as well as for advanced operations. Its analog-to-digital converter, analog comparator, and PWM output, together with its serial communication interfaces make it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference