Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory

The AT93C66-10PI-2.7 is a non-volatile, serial, 32-Kb memory device, organized as 4096 words by 8 bits. It has a low-frequency interface that supports both two-wire and four-wire slave-only serial peripheral interface (SPI). The two-wire interface requires only two pins, SDA and SCK, for bidirectional data transfer between the memory and the master device.

The AT93C66-10PI-2.7 is designed for use in telephone systems, security systems, access control systems, embedded systems, automotive applications, and many other applications that require safe storage of information.

Working Principle

The non-volatile memory is composed of two stages; the data EEPROM and the instruction/program memory. In the Data EEPROM stage, the AT93C66-10PI-2.7 stores static information, including user data and programmable security bits, such as password protection, antenna control and control register information used for SPI operations. The instruction/program memory enables the master device to create and execute instructions used to access and control the AT93C66-10PI-2.7.

The AT93C66-10PI-2.7 implements a two-wire interface that requires two pins, SDA and SCK, for bidirectional data transfer between the memory and the master device. The SI/O pins (SCL and SDA) are connected to the master device for read/write control and for data transfer.

The AT93C66-10PI-2.7 supports a variety of serial data transfer modes that include both two-wire and four-wire SPI. The two-wire interface requires only two pins, SDA and SCK, for bidirectional data transfer between the memory and the master device. The four-wire interface supports an additional four pins, including chip select, write enable and data output pins, so that the master device can read and write data with the memory. The device also supports direct data transfer using the four-wire interface.

Instruction Set

The instruction set of the AT93C66-10PI-2.7 consists of a set of commands used to control the memory. These commands are broken down into three groups: basic data instructions, access instructions, and security instructions. The basic data instructions allow the master device to write and read a single byte of data from the memory. The access instructions allow the master device to locate and address specific memory locations for sequential read and write operations. The security instructions are used to set and/or check the security bits of the memory. The security bits are used to protect the data in the memory from unauthorized access.

Applications

The AT93C66-10PI-2.7 is suitable for a number of applications, including telecommunication and automotive systems. In telecommunication systems, the device is used to store user data and programmable security bits. It is also used to store control register information used by the system to perform operations such as password protection and antenna control. In automotive applications, the device is ideal for storing non-volatile information such as vehicle diagnostics and maintenance records.

In addition to its use in telecommunication and automotive applications, the AT93C66-10PI-2.7 can also be used in embedded, medical, security, and access control systems. It is highly versatile and can be used in a number of applications that require safe storage of information.

The specific data is subject to PDF, and the above content is for reference