Allicdata Part #: | 516-2373-ND |
Manufacturer Part#: |
ATF-551M4-BLK |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Broadcom Limited |
Short Description: | IC PHEMT 2GHZ 2.7V 10MA MINIPAK |
More Detail: | RF Mosfet pHEMT FET 2.7V 10mA 2GHz 17.5dB 14.6dBm ... |
DataSheet: | ATF-551M4-BLK Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Transistor Type: | pHEMT FET |
Frequency: | 2GHz |
Gain: | 17.5dB |
Voltage - Test: | 2.7V |
Current Rating: | 100mA |
Noise Figure: | 0.5dB |
Current - Test: | 10mA |
Power - Output: | 14.6dBm |
Voltage - Rated: | 5V |
Package / Case: | 0505 (1412 Metric) |
Supplier Device Package: | MiniPak 1412 |
Base Part Number: | ATF-551M4 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
ATF-551M4-BLK Field Effect Transistor, more commonly referred to as FETs, are widely used semiconductor devices that, when connected to a circuit, form an amplifier. It is a type of MOSFET (metal oxide semiconductor FET) ranked in the RF (radio frequency) category, considered specifically a high-frequency device. The ATF-551M4-BLK is the most popular device in this field and is primarily used for switching and amplifying applications with frequencies of up to 12.4GHz.
A MOSFET works by acting as a voltage-controlled current source. This is because the voltage applied to the gate (G), source (S), and drain (D) forms a current channel between the source and drain. Essentially, when the voltage increase at the gate (and decide on the channel), it allows for an increase of current to flow from source to drain. Therefore, the ATF-551M4-BLK can be used as an amplifier and useful for signal applications ranging from 1MHz to 12.4GHz.
When it comes to ATF-551M4-BLK application fields, it is important to note what each pin serves. The gate (G) is the pin that allows the voltage to control the current between the source and drain and is the controlling pin. The source (S) is the pin that directly receives the input signal while the drain (D) is the pin that directly passes the output signal to the load. Finally, the C pin is used to connect the ground and control the PCB layout. However, one difference between the ATF-551M4-BLK and traditional FETs is that the C pin on the ATF-551M4-BLK is shorted to the source.
The working principle behind the ATF-551M4-BLK is very simple; when a voltage is applied to the gate, it causes the current to flow from the source to the drain. As voltage increases, the current will increase until it reaches its peak value, which is determined by the maximum drain current. It is important to note that the maximum drain current will vary depending on the power level of the application. Additionally, when the voltage applied to the gate is lowered, the current will start to decrease until it reaches zero.
In conclusion, the ATF-551M4-BLK is a high-frequency FET used for switching and amplifying applications up to 12.4GHz. This device is a popular choice due to its ability to produce high-speed operation while maintaining low power consumption. Additionally, its gate is voltage-controlled, which allows it to be used as an amplifier. It is important to note that the C pin on the ATF-551M4-BLK is shorted to the source and that the maximum drain current will vary depending on the power level of the application.
The specific data is subject to PDF, and the above content is for reference
FET RF 68V 2.16GHZ NI-400RF Mosfet LDMOS...
FET RF 68V 1.99GHZ TO270-4RF Mosfet LDMO...
FET RF 40V 175MHZ TO272-6 WRAPRF Mosfet ...
FET RF 65V 2.17GHZ NI780SRF Mosfet LDMOS...
FET RF 80V 1.6GHZ M243RF Mosfet LDMOS 28...
FET RF 80V 1.6GHZ M243RF Mosfet LDMOS 28...