ATSAMD20J14B-MU

Program Memory Size:	16KB (16K x 8)
Supplier Device Package:	64-VQFN (9x9)
Package / Case:	64-VFQFN Exposed Pad
Operating Temperature:	-40°C ~ 85°C (TA)
Oscillator Type:	Internal
Data Converters:	A/D 20x12b, D/A 1x10b
Voltage - Supply (Vcc/Vdd):	1.62 V ~ 3.6 V
RAM Size:	2K x 8
EEPROM Size:	--
Program Memory Type:	FLASH
Series:	SAM D20J
Number of I/O:	52
Peripherals:	Brown-out Detect/Reset, POR, WDT
Connectivity:	I²C, SPI, UART/USART
Speed:	48MHz
Core Size:	32-Bit
Core Processor:	ARM® Cortex®-M0+
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

ATsAMD20J14B-MU is an integrated circuit specifically designed for embedded applications. It is a low-power, high-performance processor, equipped with an ARM Cortex-M0+ processor, to manage tasks in a variety of microcontroller systems. ATsAMD20J14B-MU was introduced in 2017 and has proven to be popular among embedded engineering projects. This article will discuss the application field and working principle of ATsAMD20J14B-MU.

Application field of ATsAMD20J14B-MU

ATsAMD20J14B-MU is particularly well-suited for applications such as industrial automation and control, consumer electronics, wearables, and automotive solutions. It has the ability to manage critical tasks in the industrial environment, making it an ideal choice for industrial applications.In the consumer electronics field, the ATsAMD20J14B-MU is highly reliable and capable of running complex applications. It is commonly used in smart home devices and automation solutions, such as thermostats and security systems. In wearables, it is used to manage tasks within the various sensors and modules of the device. Finally, it is used in automotive solutions to manage various sensors, actuators, and communication protocols.

Features

The ATsAMD20J14B-MU is a low-power, high-performance processor that offers a variety of features and advantages. It comes with a 32-bit ARM Cortex-M0+ processor and 128Kb of flash memory. It also includes a wide range of peripherals, including up to 8-channels of 12-bit analog-to-digital converter, 2x serial peripheral interfaces (SPI/I2C), 16x GP timers/counter and up to 28x I/O pins, as well as rich features for advanced analog and low-power capabilities.It also features an ultra-low power consumption, with operating power consumption of just 1.2µA per MHz in active (run) mode, and less than 600nA in sleep mode. The ATsAMD20J14B-MU supports a variety of operating systems, including Linux, and is compatible with a wide range of programming languages and tools.

Working Principle of ATsAMD20J14B-MU

The working principle of the ATsAMD20J14B-MU is based on its ARM Cortex-M0+ processor core. This ARM-based device has a RISC-based architecture and uses reduced instruction set. The ARM Cortex-M0+ can handle up to 32 instructions at a time and can process instructions at a frequency of 48MHz. The design of the ATsAMD20J14B-MU allows it to manage multiple tasks simultaneously and concurrently. The chip has 32-bit registers, vector interrupt and data bus management unit, memory management unit, Interrupt Controller, watchdog timer, Timer System, and other peripheral management blocks, which help to effectively manage the flow of data and instructions and ensure that any tasks that need to be executed are done quickly and efficiently. When a signal is sent to the ATsAMD20J14B-MU, its Interrupt Controller, which is responsible for managing the flow of control signals, will determine the source of the signal and respond accordingly. Depending on the signal, the Interrupt Controller will forward the request to the appropriate memory management unit, the processor core, or the Timer System. The management of this data and instructions will then be handled to the appropriate hardware, allowing for task management and integration of the embedded applications.

Conclusion

The ATsAMD20J14B-MU is a powerful and reliable embedded processor, that can be used for a range of applications, including industrial automation, home automation, wearables, and automotive solutions. It is equipped with a 32-bit ARM Cortex-M0+ processor, along with a wide range of peripherals, allowing it to handle complex tasks quickly and efficiently. It also uses an efficient Interrupt Controller, memory management unit, and Timer System to effectively manage the flow of data and instructions. All of these characteristics make the ATsAMD20J14B-MU a great choice for embedded applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description