ATTINY2313V-10PU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ATTINY2313V-10PU microcontroller is an integrated circuit chip used to control small and medium-sized projects. It is a low-power, low-cost, and highly capable 8-bit microcontroller chip. The device offers 256 bytes of universal in-system programmable flash memory, 8 channels of 8-bit analog-to-digital conversion, a watchdog timer, pin-change interrupt, and a power-on reset circuit. The integrated circuit also includes a 16-bit Timer/Event counter and up to three 8-bit PWM Channels with programmable period and duty cycle.

Technology

The ATtiny2313V-10PU is based on the AVR enhanced RISC architecture and achieves up to 20 MIPS throughput at 16.5 MHz. ATtiny2313V-10PU has a typical operating voltage of 2.7V to 5.5V. The ATtiny2313V-10PU also features 8K bytes of flash memory, 2K bytes of SRAM and 256 bytes of EEPROM. It is capable of SPI, I2C and UART serial communication.

Interfaced Devices

ATtiny2313V-10PU is designed for low-power applications and can be easily interfaced with a wide range of devices and equipment, including LCDs, LEDs, transducers, sensors, switches, motors, transceivers and more. ATtiny2313V-10PU can also be interfaced with external microcontrollers. The integrated ADC allows the chip to measure analog signals such as temperature, light, and voltage. Additionally, the ATtiny2313V-10PU can interface with external digital and analog devices.

Features and Specifications

The ATtiny2313V-10PU microcontroller offers many features and benefits, including:

• Low Power Consumption of 2 mA/MHz Ideal for Battery Operated and Hand Held Applications
• On Chip Brown-out Detection
• Power-on Reset with Fixed Time Delay and User Defined Reset Threshold
• Up to 256 Bytes In-System Programmable Flash Memory
• Eight Channels of 10-bit ADC
• Two 8-bit Timer/Counters With Separate Prescalers and Compare Modes
• 16-bit Timer/Counter with Two Independent Capture and Compare Registers
• One-shot/periodic Timer Array with Independent Oscillators
• Programmable Watchdog Timer with Separate Internal Oscillator
• Up to Three 8-bit Pulse Width Modulation Channels With Programmable Period and Duty Cycle
• One 8-Channel, 10-bit Analog-to-Digital Converter
• Up to 6 km Communication Range When Used with a Standard UART Serial Port
• Two 8-bit I/O Ports
• One 16-bit I/O Port
• Bootloader Programming to Load Firmware onto the MCU with a Variety of Programmable Serial or Parallel Interfaces

Applications

ATtiny2313V-10PU is ideal for a variety of applications including home automation, wearable electronics, embedded instrumentation, robotics, handheld controllers, automotive, and medical instrumentation. The device can also be used in embedded systems, motor control, remote control, lighting, HVAC control and many other applications.

Working Principle

The ATtiny2313V-10PU microcontroller works by reading the program stored in its internal memory. This program contains instructions which instruct the microcontroller to perform certain operations. When the instructions are executed, the microcontroller moves data from the input ports to memory and processes it. The processed data is then sent to the output ports. In addition to the instructions in the program stored in the microcontroller, other external components such as sensors, transducers and actuators are used to provide input to the microcontroller. The output of the microcontroller is used to control the external components. The microcontroller can be programmed to perform any number of tasks in any order.

The specific data is subject to PDF, and the above content is for reference