AU2PGHM3/86A

Series:	eSMP®
Packaging:	Tape & Reel (TR)
Part Status:	Discontinued at Digi-Key
Diode Type:	Avalanche
Voltage - DC Reverse (Vr) (Max):	400V
Current - Average Rectified (Io):	1.6A (DC)
Voltage - Forward (Vf) (Max) @ If:	1.9V @ 2A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	75ns
Current - Reverse Leakage @ Vr:	10µA @ 400V
Capacitance @ Vr, F:	42pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	TO-277, 3-PowerDFN
Supplier Device Package:	TO-277A (SMPC)
Operating Temperature - Junction:	-55°C ~ 175°C
Base Part Number:	AU2PG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are an important component in electronics. They are commonly used to rectify alternating current (AC) into direct current (DC). In addition, diodes can also be used for other purposes such as isolating sensitive components from voltage surges, protecting components from damage due to shorts, controlling the speed of motors, and many other applications. The AU2PGHM3/86A is a single rectifier that has a wide range of applications.The AU2PGHM3/86A is a single diode that is composed of a low-voltage PN-junction in which the current flows from an anode to a cathode when voltage is applied. This diode is packaged in a TO-220 package and has an exposed bottom of the tab that allows direct contact with the module. The AU2PGHM3/86A has a maximum forward voltage drop of 0.6V and a maximum current rating of 15A.The AU2PGHM3/86A\'s most common application is in AC-to-DC rectification. When AC is applied to the diode it acts as a half-wave rectifier, allowing current to flow through the diode in one direction only. The diode clips the alternating part of the waveform to create a pulsed DC waveform. This DC waveform is then smoothed by a voltage regulator and filter to create a constant, near-zero-ripple voltage source.The AU2PGHM3/86A can also be used for switch-mode power supplies, including DC-DC converters and AC-DC converters. In DC-DC converters, the AU2PGHM3/86A is used as a switch, allowing current to flow in one direction only. This allows the converter to switch between high and low voltages in an efficient manner, thereby reducing power loss and increasing efficiency. In AC-DC converters, the AU2PGHM3/86A is used as a rectifier, as explained above.The AU2PGHM3/86A can also be used in a variety of voltage regulation and power management applications. For example, it can be used to create a voltage source that is adjustable with a precision voltage regulator. It can also be used for frequency control for applications such as switching power supplies.The AU2PGHM3/86A can also be used in automotive applications such as alternators and voltage regulators. In alternators, the AU2PGHM3/86A acts as a rectifier, allowing current to flow in one direction only. This allows the alternator to efficiently convert AC power into DC power. In voltage regulators, the AU2PGHM3/86A is used to regulate the output voltage of the alternator.Finally, the AU2PGHM3/86A can also be used in industrial applications such as motor controllers and phase angle controllers. In motor controllers, the AU2PGHM3/86A is used to switch the current on and off, allowing the motor to operate at its desired speed. In phase angle controllers, the AU2PGHM3/86A is used to control the phase angle between the voltage and current, allowing for precise and efficient operation of a motor or other device.Overall, the AU2PGHM3/86A single rectifier has a wide range of applications in the fields of electronics, automotive, and industrial engineering. It is a versatile component that can be used for AC-to-DC rectification, voltage regulation and power management, automotive alternators and voltage regulators, and many other applications. For these reasons, the AU2PGHM3/86A is an invaluable component for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description