B260-13-F Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single

A B260-13-F is a single-phase, glass passivated bridge rectifier. It is a replacement for a 6 amp 600/1000 volt silicon rectifier and has been designed for simple installation and a low mounting profile. It features a voltage rating of 250V RMS or DC with a current rating of 13A. It is designed for use in a variety of power conversion applications for products such as telephone, TV and industrial power supplies.

The B260-13-F bridge rectifier consists of a bridge consisting of four semiconductor die housed in a plastic package. The semiconductor dies consist of a cathode and an anode on each side of the package. The anode side of the bridge rectifier is connected to a common (ground) voltage, while the cathode side is connected to the load. The electrical load is connected to the two cathode leads. When DC power is supplied to the rectifier, the diode will start to conduct and current will flow through the load.

The bridge rectifier has several advantages over other types of rectifiers. It is less expensive than other rectifiers, since only four dies are used, and requires less space. The bridge rectifier also produces less noise during operation due to the low ripple current produced. Furthermore, the bridge rectifier can accept AC input voltages ranging from very low (e.g. 40 VAC) up to very high (e.g. 600 VAC). This makes it suitable for a variety of applications such as DC-to-DC conversion, home appliances and medical equipment.

The B260-13-F bridge rectifier is widely used in AC to DC power converters, AC motor drives, and other power switching applications. This bridge rectifier is also used in solid state relays, HVAC, lighting control and other switching applications. It is also used in consumer electronics such as TVs, computers, cell phones and other consumer electronics applications.

The working principle of the B260-13-F bridge rectifier is simple. When a positive voltage is applied to the anode side of the bridge rectifier, current will flow through the cathode side of the bridge rectifier to the common lead, through the load, and back to the anode side. This will produce a DC voltage at the load and the AC voltage at the anode side serves as a reference voltage. The AC voltage is reduced in amplitude and reversed in polarity throughout the load, allowing only a unidirectional current to flow.

In conclusion, the B260-13-F is a single-phase, glass passivated bridge rectifier. It is a replacement for a 6 amp 600/1000 volt silicon rectifier and has been designed for simple installation and a low mounting profile. It offers a voltage rating of 250V RMS or DC with a current rating of 13A and is suitable for a variety of applications. The working principle of this rectifier is straightforward and is widely used in switching applications, home appliances and other consumer electronics.

The specific data is subject to PDF, and the above content is for reference