B41690A7148Q9

Aluminum electrolytic capacitors are widely used in electronic devices for their long life and low cost. The B41690A7148Q9 is a radial lead aluminum electrolytic capacitor with polarized snap-in terminals and a long service life. This capacitor is often used in input and output filter applications, audio signal filtering, and as a main power supply filter in switch mode power supplies.

The B41690A7148Q9 capacitor is designed with a polarized snap-in terminal to ensure correct polarity connection. The instruction manual for this capacitor states that the negative (-) pin should be connected to the capacitor’s outer shell (or negative (-) lead). This will ensure that the capacitor stores charge in the correct direction. Failure to do this can result in catastrophic failure and eventual destruction of the capacitor.

The B41690A7148Q9 capacitor has a working voltage of 160 volts and a maximum ripple current of 3.3 amps. Its capacitance is rated at 4.7uF and its temperature range is rated at 105°C. The construction of this type of capacitor is two plates (electrodes) separated by a dielectric material, usually aluminum oxide. The two plates are then connected to two electrical terminals, the positive (+) and the negative (-).

When electricity is passed through the capacitor, it charges up and stores the energy in the form of electric charges. As the capacitor charges, the voltage and current will reach their maximum levels. When the voltage and current reach their maximum levels, the capacitor will stop taking current and saturate. The device then acts as a filter and only allows the required frequency of signals to pass through it while filtering out low-frequency signals.

The B41690A7148Q9 capacitor has a wide range of uses, from audio signal filtering to main power supply filters in switch mode power supplies. As well as this, it can also be used in timing circuits and as a part of the feedback loop control in power supplies. This capacitor is suitable for use in many audio applications, such as speakers, as well as for general power supply filtering. The fact that this capacitor has a large capacitance value means that it is capable of handling large amounts of current, which is useful for filtering high-frequency signals or for heavy-duty power applications.

The B41690A7148Q9 capacitor is a reliable and durable component that can be used in many electronic applications. Its high working voltage and wide temperature range make it a good choice for audio and main power filter applications, while its polarized snap-in terminals make it easy to connect. As well as this, the large capacitance value of this capacitor means that it is suitable for handling large amounts of electrical current.