B41828A4106M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

B41828A4106M is a type of aluminum electrolytic capacitor. Generally speaking, aluminum electrolytic capacitors are the most commonly used type of electrolytic capacitors and are widely used in electronic devices such as computers, televisions, and home appliances.

Aluminum electrolytic capacitors are comprised of two aluminum foils rolled into a tight cylinder. One of the foils is etched with a series of microscopic pores which create an enormously large surface area for the stored electrical charge. In between the two aluminum foils lies an electrolytic material, typically a gel or a liquid. This electrolyte is composed of a combination of acids and salts which act as the dielectric material of the capacitor.

The amount of electrical charge that can be stored in an aluminum electrolytic capacitor is determined by its capacitance rating, normally measured in microfarads (µF). This rating indicates the amount of charge the capacitor can store per single volt of applied voltage. The higher the capacitance rating, the more charge the capacitor can store.

The B41828A4106M is an aluminum electrolytic capacitor with a capacitance rating of 4.7 microfarads and a voltage rating of 10 volts. Its operating temperature range is -40 to +105 degrees Celsius. It is 20% radial capacitors with a RoHS-compliant lead-free construction.

The most common application for this particular capacitor is filtering and filtering out AC ripple and noise from impedance converters.By combining the capacitor with a resistor or inductor, one can create a low pass filter which only allows the frequencies below that of the resonant frequency to pass through. It is also commonly used in audio circuits to filter out frequencies above the audio range, and it is also used in many other applications such as power supplies, timing circuits, and signal conditioning circuits.

The working principles of aluminum electrolytic capacitors are based on the principle of electrolysis. Electrolysis is the process in which electrons move from one plate to another when an electrical current is applied. This movement of electrons causes the plates to become charged and thus stores energy in the form of electric potential. The energy stored can be retrieved when the electrical current is reversed.

Aluminum electrolytic capacitors have many advantages over other types of capacitors such as Tantalum and Ceramic capacitors. They have higher capacitance values per unit volume, allowing for more energy storage in a smaller package. They also have higher volumetric efficiency and therefore higher power density, meaning that they can store more energy in a given area. Additionally, they have much lower internal resistance, allowing for higher current flow with minimal voltage drop.

In conclusion, the B41828A4106M aluminum electrolytic capacitor is a common ten volt capacitor with a 4.7 microfarad capacitance rating. It is commonly used for filtering out AC ripple and noise in impedance converters, and has many advantages over other types of capacitors. Its operating principles are based on the principle of electrolysis.

The specific data is subject to PDF, and the above content is for reference