B41888C4687M000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are often used in a wide range of applications due to their high capacitance and low cost. This article will focus on the application field and working principle of a particular type of aluminum electrolytic capacitor, the B41888C4687M000.

Construction and Types

The B41888C4687M000 is constructed from an anode and a cathode separated by an electrolyte that forms an insulating oxide layer on the anode. The anode of the B41888C4687M000 is typically composed of aluminum foil and a spirally wound paper separator, while the cathode is composed of an electrolyte. Aluminum electrolytic capacitors are classified as either polarized or non-polarized depending on their construction. The B41888C4687M000 is a polarized aluminum electrolytic, meaning the current flows through it in one direction only.

Working Principle

The working principle of the B41888C4687M000 is based on the principles of electrochemistry. When a voltage is applied, an electric current flows which causes metal ions to migrate from the anode to the cathode. On reaching the cathode, these ions are converted into metal oxides which form a near-insulating layer on the surface of the anode. This layer acts as a dielectric, allowing the capacitor to store electrical energy.

The anode and cathode of the B41888C4687M000 are connected in series with the electrolyte in between. As the electric current passes through the capacitor, a charge builds up on the anode and a corresponding charge builds up on the cathode. The resulting voltage across the two plates is determined by the amount of charge stored on each of them.

Applications

The B41888C4687M000 is widely used in a variety of applications due to its high capacitance and low cost. It is commonly used in consumer electronics, telecommunications, automotive electronics, and industrial electronics.

In consumer electronics, the B41888C4687M000 is used in a variety of devices such as TVs, computers, and mobile phones. It is used to store energy in the form of a voltage, which is used to power different components of the device.

In telecommunications, the B41888C4687M000 is used in modems and routers as a signal amplifier. This helps to boost the signal strength of the device, allowing it to reach farther distances.

In automotive electronics, the B41888C4687M000 is used in a variety of electronic systems such as powertrains and fuel injection systems. It is used to store electrical energy, which is then used to power multiple components in the system.

Finally, in industrial electronics, the B41888C4687M000 is used in motor control systems as well as in power supplies. It helps to regulate the voltage and current flow in the system, allowing for better control and efficiency.

Conclusion

The B41888C4687M000 is a type of aluminum electrolytic capacitor used in a variety of applications. Its construction and working principle rely heavily on electrochemical principles, while its capacitance allows it to be used in a variety of consumer, telecommunications, automotive, and industrial electronics.

The specific data is subject to PDF, and the above content is for reference