B43305B2567M80

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.260" (32.00mm)
Size / Dimension:	0.984" Dia (25.00mm)
Lead Spacing:	0.394" (10.00mm)
Impedance:	310 mOhms
Ripple Current @ Low Frequency:	1.93A @ 100Hz
Applications:	General Purpose
Ratings:	--
Series:	B43305
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	2000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	230 mOhm @ 100Hz
Voltage - Rated:	200V
Tolerance:	±20%
Capacitance:	560µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors (also known as \'electrolytics\') are electronic components which use an electrochemical reaction to store energy. They are the most common type of capacitor used for electrical and electronic applications, and are found in a wide range of products, including motors, computers, power supplies and other electronic equipment. B43305B2567M80 is one of the most commonly used electrolytic capacitors. This article will explain its application field and working principle.

Application Field

B43305B2567M80 electrolytic capacitors are used in a variety of applications, including motor control, power supplies, electronic equipment, and other high-frequency electronics. They are known for their high values, low price, and long life. They are great for dealing with short-term high-frequency signals, as their quick response times can help to reduce noise and improve signal accuracy. Moreover, electrolytic capacitors are also widely used in decoupling applications. Decoupling capacitors are used to filter out noise and power supply ripple from electronic circuits.

Working Principle

B43305B2567M80 electrolytic capacitors are made up of two pieces of metal plates separated by an electrolyte material. When a voltage is applied across the two plates, an electric current will flow and charge the capacitor, resulting in the injection of positive and negative ions into the electrolyte material. The injected ions form a charge at each plate and the capacitor starts to store energy. The capacitance of the capacitor depends on the surface area of the two metal plates, as well as the type of electrolyte material used. When the voltage is removed, the charge at each plate is also removed. This discharge process takes place at a much slower rate than the charging process, allowing for the storage of energy for longer periods of time. This is why electrolytic capacitors are so widely used in electronics.

Conclusion

B43305B2567M80 electrolytic capacitors are an important component of many electronic applications. They are known for their high values, low price, and long life. Their quick response times and ability to store energy for long periods of time make them a great choice for high-frequency applications and decoupling. This article has explained the application field and working principle of B43305B2567M80 electrolytic capacitors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description