B43455A5568M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are the most commonly used capacitors in today\'s electrical and electronics industry, and are also the fastest developing and most widely used type of capacitors. The B43455A5568M aluminum electrolytic capacitor has a wide range of applications in the electrical and electronics industry and plays an important role in electronic technology.

B43455A5568M Application Field

B43455A5568M aluminum electrolytic capacitors are widely used in digital photo frames and digital cameras, air conditioners, cars, communications equipment, computers, TVs, and other devices. B43455A5568M\'s applications include roll-up stabilization, boost, filter input/filter, storage, etc. Its uses can be divided into the following categories.

• Stabilization: B43455A5568M can be used in power regulation to maintain constant voltage and prevent over-voltage and over-current damage.
• Boost: B43455A5568M can be used in voltage/current conversion. When there is a large voltage or current input fluctuation, a large voltage difference appears and the current flow rate is unstable. B43455A5568M aluminum electrolytic capacitors can be used to level this voltage difference.
• Filter Input/Filter: B43455A5568M can be used to filter out wideband input signals and threshold them. This is important for the reliable operation of the device.
• Storage: B43455A5568M can be used to store electrical energy and provide high power discharge.

B43455A5568M Working Principle

The B43455A5568M aluminum electrolytic capacitor is a polarized capacitor. Its working principle is that two different metal foil plates are rolled together, and an ion exchange separator is placed between them, and the layer is soaked in a conductive electrolyte. When a positive voltage is applied to the positive plate and an equal negative voltage is applied to the negative plate, a potential difference is formed between the two, attracting electrons and causing a current to flow in the capacitor.

The construction of the B43455A5568M aluminum electrolytic capacitor is relatively complicated. The positive plate is an all aluminum foil rolled into a roll and a small hole in the center to polarize the capacitor. The negative plate is formed by a metal-aluminum oxide-aluminum composite sheet, and the anode aluminum film forms a conductive bridge between the positive anode aluminum film and the negative cathode oxide film. The separator is a reinforced polyester film that is completely soaked in an electrolyte.

The working principle of the B43455A5568M aluminum electrolytic capacitor is simple. When capacitors are connected in series, the capacitance increases. When capacitors are connected in parallel, the capacitance decreases. The measurement of capacitance is expressed in Farads. Its working principle is mainly based on the physical law of electrostatic induction.

Conclusion

B43455A5568M aluminum electrolytic capacitors have a wide range of applications in the electrical and electronics industry, and plays an important role in electronic technology. The working principle is based on the physical law of electrostatic induction. When capacitors are connected in series, the capacitance increases and when capacitors are connected in parallel, the capacitance decreases.

The specific data is subject to PDF, and the above content is for reference