B43508E2227M000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are polarized capacitors in which two electrodes are separated by an aluminum oxide layer. They are widely used in electronics applications due to their relatively high capacitance and voltage ratings.

The B43508E2227M000 is a radial leaded, non-solid aluminum electrolytic capacitor. The E2227M000 has an initial capacitance of 220uF and a voltage rating of 35V. It is designed to provide high ripple current ratings and low ESR values. The capacitor is also available in various sizes to fit in tight spots. It has an operating temperature range of -40°C to +105°C.

The B43508E2227M000 utilizes aluminum as its electrodes and an electrolytic paper as its dielectric material. The aluminum is etched and rolled into an aluminum foil, and an electrolyte is then applied to both the sides of the aluminum. The electrolyte helps to form an oxide layer on the surface of the aluminum that acts as an insulator. This helps to create a layer between the electrodes that is electrically stable.

The Aluminum Electrolytic Capacitors B43508E2227M000 is typically used in coupling applications, noise filtering, and instrument amplifier circuits. It can also be used to provide extra capacitance to inhibit electrical noise and protect against voltage spikes. The capacitor is also suitable for use in DC to DC converters, DC signal suppression, and switched power supplies.

The working principles of the B43508E2227M000, like all other aluminum electrolytic capacitors, follow the basic principles of capacitance. The capacitance of a capacitor depends on the surface area of the plates, the distance between the plates and the dielectric material in between them. In the case of the B43508E2227M000, the plates are aluminum, the distance between them is regulated by the electrolytic paper and the dielectric material is the aluminum oxide layer.

The capacitance of the B43508E2227M000 increases when current is applied, due to the oxide layer expanding. The current that is applied gets stored as energy in the capacitor and can later be discharged. The current is then removed from the capacitor when the voltage across the capacitor falls below the capacitance voltage rating. This helps to regulate the current in the circuit.

The B43508E2227M000 is a great choice for many electronics applications due to its relatively high capacitance and voltage ratings. Its low ESR and high ripple current ratings make it a reliable capacitor for many types of circuits. It is also available in various sizes to fit in tight spots. Therefore, the B43508E2227M000 is a great choice for a variety of electronic applications.

The specific data is subject to PDF, and the above content is for reference