B43515A5477M7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, B43515A5477M7 included, are widely used in switching power supplies, DC/DC converters, CPUs, audio devices, digital measurement equipment and many other electronic applications. B43515A5477M7, specifically, is especially suited for filtering and buffering applications since it captures and holds bits of energy to maintain the output voltage of power supplies that are subjected to constant load.

Electrolytic capacitors can be divided into two major categories, which are Aluminum Polymer capacitors and Electrolytic Tantalum capacitors. In general, Aluminum Polymer capacitors are high surface area, with a wide temperature range and low ESR and ESL, while Electrolytic Tantalum capacitors offer higher volumetric efficiency, higher capacitance values and low leakage current, but have higher ESR and ESL. Both categories, however, can achieve high capacitance of up to 1000 µF with their increased surface area using the technologies of multilayer construction.

B43515A5477M7 belongs to the Aluminum Polymer family. It has a capacitance of Supplied as 2,000µF at 50V. Its rated voltage is 50V, and its equivalent series resistance (ESR) is 3.0mΩ at 100kHz with 5V bias. Its operating temperature range is -55℃ to +85℃, and its polarization mode is plus +DC. These make it suitable for use in a wide variety of applications.

The working principle of Aluminum Polymer capacitors, such as B43515A5477M7, is based on the chemical reactions that occur when metallic aluminum and an electrolyte are combined. When a voltage is applied to the capacitor, a chemical reaction reduces the resistance of the electrolyte and the electric current passes through the electrolyte. This reaction produces a dielectric substance (anodization) and also a voltage that is much higher than that applied to the capacitor. The electric current then passes through the dielectric substance, leading to an electrostatic force between the capacitor plates and a resulting capacitance.

The inner structure of Aluminum Polymer capacitors is very simple. It consists of two metal foil plates, separated by a dielectric (non-conductive) layer in the form of a polymer. The two plates of the capacitor are connected with current leads that make contact with the metal foil layers. A capacitor constructed in this way can be made a lot smaller than other types of capacitors, making it suitable for many electronic applications.

In summary, B43515A5477M7 is an Aluminum Polymer capacitor with a capacitance of 2,000μF, a rated voltage of 50V, and a rated ESR of 3.0mΩ. It is widely used in power supply filtering and buffering applications due to its low ESR and ESL. It has a simple inner structure and can be made in a very small size, making it suitable for many electronic applications.

The specific data is subject to PDF, and the above content is for reference