B43540B5337M007

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.654" (42.00mm)
Size / Dimension:	1.378" Dia (35.00mm)
Lead Spacing:	0.394" (10.00mm)
Impedance:	420 mOhms
Ripple Current @ Low Frequency:	2.47A @ 100Hz
Applications:	General Purpose
Ratings:	--
Series:	B43540
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	10000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	290 mOhm @ 100Hz
Voltage - Rated:	450V
Tolerance:	±20%
Capacitance:	330µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors, commonly referred to by their acronym, AECs, are uniquely different from other types of capacitors because they are connected in series using two conductors: an anode and a cathode. These two conductors are then separated by a non-conductive film. This particular type of capacitor is most frequently used in circuits with high-frequency signals where it is needed to block alternating current while allowing direct current to pass through.

B43540B5337M007 Application Field

B43540B5337M007 is a particular type of aluminum electrolytic capacitors that is mostly used in circuits with a frequency of 400Hz and in audio amplifiers. In these applications, the B43540B5337M007 can be used to block noise and improve signal quality. Additionally, the B43540B5337M007 is commonly used in motor drives, thermoelectric convertors, LED driver circuits, power supply circuits, and various other power electronic devices.

Working Principle

The operating principle of an aluminum electrolytic capacitor is relatively simple. When a direct current is applied to the anode and cathode, an oxide film forms on the surface of the anode. This oxide film is an insulator that separates the anode and the cathode, creating a non-conductive barrier between them. This barrier is dependent on the amount of direct current that is applied to it and determines the capacitance of the capacitor. As the current applied to the capacitor increases, so does the capacitance. The dielectric that separates the electrodes of an aluminum electrolytic capacitor is constructed of porous aluminum oxide and is considered the most important part of the capacitor’s design. This dielectric is what gives the capacitor its unique capabilities. Since aluminum oxide is an insulator and can withstand high temperatures, it is ideal for use in devices that may generate heat.

Types of B43540B5337M007

The main types of B43540B5337M007 aluminum electrolytic capacitors are snap-in, leaded, and surface mount. Each type has a different design and is suited for different applications. The snap-in type is the most commonly used and has leads that snap into a circuit board. The leaded type has leads that are soldered directly to the board. The surface mount type has a low profile and is best suited for applications where space is limited.

Conclusion

The B43540B5337M007 is an incredibly versatile aluminum electrolytic capacitor that can be used in a variety of applications. It has a wide range of capacitance and is capable of blocking high-frequency signals while allowing direct current to pass through. Its ability to tolerate high temperatures and its low profile design make it an ideal choice for a variety of uses. All of these features make the B43540B5337M007 an excellent choice for any circuit with a frequency of 400Hz or higher.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description