B43584A6188M003

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors, also known as integrated capacitor or conversation capacitors, are electrical components that are used to store energy (charge) for a short period of time. They are composed of two metallic plates, separated by a dielectric or insulating material, usually an electrolyte of aluminum oxide. The metal plates are the positive and negative connections to the storage medium, and the electrically charged oxide film provides the dielectric – or insulation – which allows the capacitor to store an electrical charge.

Aluminum electrolytic capacitors can be used in many applications, such as for regulating and stabilizing power supplies and for filtering out high frequencies in audio systems. Additionally, they can be found in a wide array of circuit designs where the energy storage requirement is relatively small compared to that of other capacitors such as ceramic, polyester, or tantalum.

B43584A6188M003 Capacitor Application and Working Principle

The B43584A6188M003 aluminum electrolytic capacitor is a surface-mount device with a capacitance of 0.047 μF (0.047 microfarads). The specific application for this component is mainly for filtering of high frequency signals in audio systems. The working principle of this capacitor is based on the amount of voltage applied across the plates, which causes the aluminum oxide material to build up an electrical charge with enough force to create an electric field. This electric field will then be used to store and discharge energy over a period of time, allowing for the capacitor to act as a filter for high frequency signals.

In terms of actual circuit design, this capacitor can be used in both positive and negative supplies. When used in a positive supply, the electrolyte will charge up quickly, discharging the stored energy at the same rate; when used in a negative supply, the electrolyte will charge slowly, allowing the stored energy to be discharged over a longer period of time.

When using this capacitor, there are a few important factors to keep in mind. First, the voltage must stay within the range of its electrical specifications. Second, keep in mind the operating temperature, or the temperature at which the capacitor can be used safely. The B43584A6188M003 is rated to be used in an environment of 85 degrees Celsius or less, and should not be operated at higher temperatures. Finally, correctly calculate the amount of noise that will result from the use of the device, as noise levels in excess of the capacitors rated output can result in audible artifacts in the signal.

Conclusion

Aluminum electrolytic capacitors are one of the most commonly used electrical components in circuit designs due to their versatility, low cost, and range of capacitance values. The B43584A6188M003 is a surface mount aluminum electrolytic capacitor with a capacitance of 0.047 μF, designed for filtering out high frequencies in audio systems. It is important to keep in mind the electrical specifications, operating temperature, and levels of noise produced when using this type of capacitor. With this knowledge, designers can implement the proper components into their designs to ensure safe and reliable operation.

The specific data is subject to PDF, and the above content is for reference