B43624A2128M002

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in electronic equipment for their good heat dissipation, high insulation resistance and long life, and the composition and working principle of aluminum electrolytic capacitors are relatively simple.

Aluminum electrolytic capacitors are composed of two electrodes, an insulation separator and an electrolyte. The two electrodes include a central cathode with a large surface area, grey oxide layer formed by chemical oxidation of the aluminum foil surface and an anode, typically a covered aluminum foil with a chemical deposition layer. The aluminum anode and the cathode are electrically connected and electrically connected via a lead wire. The insulation separator is a perforated membrane composed of plastic and aluminum material. The organic electrolyte is a liquid or a gel composed of a solution, which is an ionic conductor.

The working principle of B43624A2128M002 aluminum electrolytic capacitor is based on the principle of ion diffusion. When a DC voltage is applied between the two electrodes, a current flows through the electrolyte and charges the dielectric layer through the electrolyte, and this charge, which will cause the dielectric layer to be polarized. Thus, a charge is built up between the two electrodes, forming a capacitor.

B43624A2128M002 aluminum electrolytic capacitors are mainly applied in high power general power electronics, such as solar power, photovoltaic and wind power converters. Capacitor start and run motors in refrigeration equipment, water pumps, air compressors, etc. As a power converter in solid-state relay circuits, motor control circuits, home appliance circuits, etc. and for filtering, coupling, decoupling, timing and surge absorption in electronic circuits.

Reasonable use of B43624A2128M002 aluminum electrolytic capacitors can achieve a variety of effects. This type of capacitor has strong anti-interference ability and is not easy to be affected by temperature, humidity and other external conditions, so it is usually used in high-power occasions; the material of the capacitor is relatively soft, its quality is light and the cost is low, and it is not easy to be damaged during installation; its use life is relatively long, generally can be used for more than 2000 hours, and the maximum can reach more than 6000 hours; at the same time, it has a good heat dissipation function and does not produce sparks when it is used.

In conclusion, B43624A2128M002 aluminum electrolytic capacitors are widely used in high power general power electronics, such as solar power, photovoltaic and wind power converters. They have strong anti-interference ability, light material, low cost and good heat dissipation function. Reasonable use of them can achieve a variety of effects.

The specific data is subject to PDF, and the above content is for reference