B43888C4476M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are passive devices consisting of two electrodes separated by a dielectric material known as an electrolyte. The cathode is the positive lead and the anode is the negative lead. The B43888C4476M is an aluminum electrolytic capacitor that is commonly used in power supplies or as a DC decoupling capacitor due to its low cost and physically small size.

The B43888C4476M is a non-polarized, through-hole aluminum electrolytic capacitor with a rated capacitance between 47μF and 470μF. The tolerances are usually ±20% and the voltage ratings are typically 6.3V or 10V DC. The capacitors also have a low ESR (equivalent series resistance), which makes them suitable for applications that require better ripple current performance. The B43888C4476M is a radial leaded capacitor, which means that the leads are connected to the capacitor body along the same radius.

The working principle of the aluminum electrolytic capacitor is as follows: the cathode is connected to an electrolyte, usually an aqueous solution of Ethylene Glycol. This solution is responsible for providing ions, which are positive and negative charged particles. The positive electrode is called the anode, while the negative one is called the cathode. The anode is usually made of aluminum and the ions flow through the electrolyte and are attracted to the anode. As the ions build up, they create a negative charge on the anode. When a voltage is applied to the terminals, the anode creates a capacitance that can be measured in Farads. The more ions present, the higher the capacitance.

The B43888C4476M aluminum electrolytic capacitor is used primarily in power supplies, DC decoupling, and energy storage applications. In power supplies, these capacitors are used to help stabilize the output voltage, filter undesirable noise, reduce heat, and regulate the current delivered to the load. DC decoupling is used to separate the low-frequency noise components from a system’s main power source, providing improved performance and stability. Additionally, these capacitors can be used as an energy storage component in applications such as motor controls, UPSs, and surge protectors.

In conclusion, the B43888C4476M is a common aluminum electrolytic capacitor used in power supplies, DC decoupling, and energy storage applications. It is a non-polarized, through-hole capacitor with a rated capacitance between 47μF and 470μF and is characterized by a low ESR (equivalent series resistance). The working principle of the aluminum electrolytic capacitor is based on the flow of ions through an electrolyte solution, creating a capacitance measured in Farads. This allows the capacitor to store energy and filter out noise, helping with voltage stability and improved performance.

The specific data is subject to PDF, and the above content is for reference